3.6 Creating your own operating interface 3.7 Starting the RFID application 3.8 Operating menu overview Basic knowledge 4.1 Function principle of Identification Systems 4.2 Product description 4.3 Control function 4.4 Data integrity 4.5 Files 4.6 Data carrier types 4.7 CRC check Technical Data Appendix www.balluff.com...
Internet at "www.psionteklogix.com". Note A detailed user‘s guide for the processor can be found on the accompanying BIS-CD or in the Internet under www.balluff.com. 1.4 Manual The manual is organized so that the sections build on each other. organization Section 2: Basic safety information.
1.6 Symbols Attention! This symbol indicates a safety instruction that must be followed. Note, tip This symbol indicates general notes. 1.7 Abbreviations Balluff Identification System Cyclic Redundancy Check EEPROM Electrically Erasable Programmable Read Only Memory Electromagnetic Compatibility Personal Computer RFID...
You can return batteries or rechargeable batteries after use at community collec- tion points at no cost. You may also return batteries or rechargeable batteries to us by mail with sufficient postage: Balluff GmbH, Schurwaldstraße 9, 73765 Neuhausen a.d.F., Deutschland Attention! Use only Balluff approved power supplies.
The system components of the Handheld Programmer are powered by a 3.7V rechar- geable battery pack (Li-Ion). ► Rechargeable batteries provided by Balluff are not charged and have to be charged prior to first use. Fig. 3: Connecting the power supply – Charging the battery pack O perating life and A rechargeable battery with high capacity has a battery life of up to 48 hours after a full charge.
Handheld Programmer BIS L-87_ Getting Started 3.2 Overview of WORKABOUT PRO C BIS L-870-1- 008-X-000 Fig. 4: Handheld Programmer BIS L-870-1-008-X-000 Ø > 20 mm Read/write head for BIS L data carriers with round coil Active surface (underside) BIS L-871-1- 008-X-000 Fig.
Page 9
Read/write head for BIS L data carriers with round coil Ø < 20 mm Active surface (frontside) BIS L-870-1- 008-X-002 Fig. 7: Handheld Programmer BIS L-870-1-008-X-002 Ø > 20 mm Read/write head for BIS L data carriers with round coil Barcode scanner Active surface (underside) www.balluff.com...
The most recent documents are available in the Internet at: http:// www.psion-teklogix.com/. 3.6 Creating your Note own operating The BALLUFF.dll was developed as an independent software for creating a custom interface tailored operating interface, for the Handheld Programmer. The ordering code for this application is available on demand.
Handheld Programmer BIS L-87_ Getting Started ► 3.7 Starting the RFID On the desktop press on "Start > Programs > BALLUFF RFID > BIS L RFID" application (depending on the WindowsCE ® version only the Windows ® -Logo may appear (as shown in Fig.
Page 12
CodeTag Type Selection of the data carrier type. All or one particular data carrier type may be selected. All Balluff supported data carrier types are processed (factory default setting). BIS L-1xx Only BIS L-1xx data carrier types are processed...
Page 13
Starts a read operation, the status indicator flashes yellow and the button label changes to "Stop" (cancel read operation). [Write] Starts a write operation, the status indicator flashes yellow and the button label changes to "Stop" (cancel write operation). www.balluff.com...
Page 14
Handheld Programmer BIS L-87_ Getting Started [CRC Init] Initializes a data carrier for using the CRC checksum. The button is only shown if on the "Settings" tab the option "Use CRC Check" is activated. [Clear] Clears the data read so far from the display window. Editing data ►...
Page 15
A saved file can be selected and opened. The data are displayed on the "RW Data" tab. [Save] Opens the dialog "Save file as…". The data (from the display field on the tab "RW Data") can be saved in a file. www.balluff.com...
Page 16
Handheld Programmer BIS L-87_ Getting Started "About" tab Display of the software version and manufacturer information. Fig. 15: "About" tab...
– Saving/loading files. Creating your Note own operating The BALLUFF.dll software is available for creating a custom tailored operating inter- interface face. This application can be ordered separately. The ordering code is available on demand. 4.3 Control function The Handheld Programmer is the link between data carrier and controlling system. The Handheld Programmer can be used to check, correct or initialize data carriers.
Handheld Programmer BIS L-87_ Basic knowledge 4.4 Dat a integrity In order to ensure data integrity, data transfer between the data carrier and processor must be monitored using a check procedure. The factory default setting in the Handheld Programmer is for double reading with comparison. Alternately the CRC_16 data check can be selected.
Data carrier type Memory capacity (bytes) Usable bytes for CRC_16 BIS L-10_-01/L 192 Byte 168 Byte BIS L-10_-05/L 192 Byte or 5 Byte 168 Byte or 3 Byte BIS L-20_-03/L 5 Byte CRC_16 is not supported www.balluff.com...
Handheld Programmer BIS L-87_ Technical Data Dimensions Fig. 33: BIS L-870-1-008-X-000 dimensions (in mm) Fig. 34: BIS L-871-1-008-X-000 dimensions (in mm) Fig. 35: BIS L-873-1-008-X-000 dimensions (in mm)
Page 21
Charging time Battery life see page 7 48 h Operating Ambient temperature range -10 °C … +50 °C Conditions – EN 61000-4-2/3/4/5/6 – Severity Level 3A/3A/–/–/– – EN 55011 – Gr. 1, Cl. A Vibration/shock EN 60068 Part 2-6/27/29/64/32 www.balluff.com...
873 = Portable reader with integrated read/write head for data carriers with Ø < 20 mm Interface 1 = Bluetooth Software type 008 = Balluff Software for BIS _-87x-... Language X = Multilingual Additional features 000 = Standard 001 =...
Page 23
100-240 V primary Secondary voltage U DC ± 5 % Input frequency F 50-60 Hz primary Secondary current I 800 mA Ambient temperature range T −40 °C ... +70 °C Material PPE-V1-125 °C Color black Material number 11023834 Color black www.balluff.com...