Table of Contents
Advertisement
32 Rerecording (Tape Duplication)
1. Audio cables from AUDIO OUT Jacks
of VCR 1 to AUDIO IN Jacks of VCR 2
VCR 1
Playing VCR
ANT
AUDIO
L
OUT
IN
R
VIDEO
CH3 CH4
IN
OUT
Audio and Video cables are not supplied.
1
Make the connections shown above.
2
VCR 1 will play your tape. Put a prerecorded tape in VCR 1.
3
VCR 2 will record your tape. Insert a blank tape in VCR 2. The
VCR must be in VCR position. (The VCR/TV light will appear on the
display panel. If it does not, press the VCR/TV button once.)
4
Turn on the TV and set it to channel 03 or 04, whichever
channel the CH3/CH4 switch on VCR 2 is set to.
5
Point the remote control at VCR 2. Press the Number
buttons 0, 0 to select Line Input. A/V IN will appear on
the screen.
6
Press the SPEED button to select SP or SLP at VCR 2.
7
Press the PLAY button on VCR 1 and the REC(ord)/OTR
button on VCR 2 at the same time.
To stop recording, press the STOP/EJECT button on VCR 1, then
press the STOP/EJECT button on VCR 2.
IN
OUT
2. Video cable from VIDEO OUT Jack
of VCR 1 to VIDEO IN Jack of VCR 2
VCR 2 - Recording VCR
• Unauthorized recording of copy-
• If a program has copy guard pro-
• These instructions show you how to
ANT
AUDIO
IN
L
OUT
IN
R
VIDEO
OUT
CH3 CH4
OUT
IN
3. RF coaxial cable
from the OUT jack
of VCR 2 to the TV's
ANTENNA IN Jack
Helpful Hints
righted television programs, video
tapes, or other materials may
infringe on the rights of copyright
owners and violate copyright laws.
tection, it may not record clearly.
copy tapes using two VCRs like
yours. Different VCRs may operate
differently.
Advertisement
Table of Contents
