Table of Contents
Advertisement
10 Hookups With a Stereo TV
VIDEO (yellow) and
AUDIO (red and white)
OUT Jacks
Audio and Video cables are not supplied.
1
Connect the antenna or cable to the ANT(enna) IN Jack
on the back of the VCR.
2
Connect a video cable to the yellow VIDEO OUT Jack on
the back of the VCR. Then, connect the other end of the
video cable to the VIDEO IN Jack on your TV.
3
Connect audio cables to the red and white AUDIO OUT
Jacks on the back of the VCR. Then, connect the other
end of the audio cables to the AUDIO IN Jacks on your
TV.
4
Turn on your TV, making sure it is in Line Input mode. Please
refer to your TV owner's manual for details.
1
antenna or
cable to
ANT(enna)
IN Jack
AUDIO
ANT
IN
L
OUT
IN
R
VIDEO
OUT
CH3 CH4
OUT
IN
2
Video Cable
Audio Cable
3
Audio and Video
IN Jacks on TV
Helpful Hints
• A stereo audio cable (not supplied)
is used here to deliver audio to the
TV's left and right channels.
• The TV must be in Line Input mode.
Please refer to your TV owner's
manual.
Advertisement
Table of Contents
