merten MEG5252-03.. Operating Instructions

Rotary moduleArt.-Nr. MEG5252-03../-04..© Schneider-Electric 2014V5252-581-0110/16
en
Rotary module
Operating instructions
Art. no. MEG5252-03../-04..

Necessary accessories

– To be completed with:
• corresponding inserts (see function overview)
• Frame in corresponding design

For your safety

¼
DANGER
Risk of serious damage to property and per-
sonal injury, e.g. from fire or electric shock,
due to incorrect electrical installation.
Safe electrical installation can only be ensured if
the person in question can prove basic knowl-
edge in the following areas:
• Connecting to installation networks
• Connecting several electrical devices
• Laying electric cables
These skills and experience are normally only
possessed by skilled professionals who are
trained in the field of electrical installation technol-
ogy. If these minimum requirements are not met
or are disregarded in any way, you will be solely li-
able for any damage to property or personal inju-
ry.

Getting to know the rotary module

With the rotary module (referred to below as module),
you can carry out various functions such as:
• Switching, dimming and controlling blinds
• Calling up, changing and saving Basic light and blind
scenes
Function overview of the modules on re-
ceiving inserts
Complete the module with the receiving inserts for
switching, dimming or controlling blinds/roller shutters in
order to carry out local light and blind control.
Switching:
• Electronic switch insert Local switching, calling up
and saving local light
• Relay switch insert
scenes
• Electronic switch insert, Separate switching of both
2-gang channels locally
• Relay switch insert,
2-gang
Dimming:
• Universal dimmer insert Local switching and dim-
ming, calling up and saving
• 1-10 V control insert
local light scenes
• DALI insert
• Universal dimmer insert, Separate dimming of both
2-gang channels locally
Controlling Blinds/roller shutters:
• Blind control insert Local raising/lowering, call-
ing up and saving local Ba-
sic blind scenes
Function overview of the modules on
sending inserts
Complete the module with the sending central unit insert
in order to carry out global light and blind control via the
PlusLink (PL).
Global light and blind control:
• Central unit insert global switching, global
dimming, global raising/
lowering, calling up and
saving global Basic light/
blind scenes
Connections, displays and operating
elements
Front:
B
A
A Rotary knob
B LED segments (status, orientation)
C Module push-buttons
Rear:
A
A Module interface

Mounting the module

A
A Insert (see function overview)
B Frame
C Module
An initialisation period of approx. 15 s begins
|
when mains voltage is switched on or the module
is plugged in. The LED segments flash during this
initialisation period. After this period has elapsed,
the module is ready for operation.
Operating the module: local light and
blind control
"Blind/roller shutter" will be referred to below as just
"blind".

Switching loads on/off

In combination with 1-gang insert
• With push-buttons
• With rotary knob
– by rotating or briefly pressing the knob
With dimmer inserts a quick half turn is required to
|
switch directly to full brightness.
C
B
C
< 0,5 s