Changing A Particular Option - Samsung MXD-K025AN Installation Manual

FUNCTION SETTING

SEG 3, 4, 5, 6, 8, 9 additional information
When the SEG 3 is set as "1" and follow Auto Change Over for HR only operation, it will operate as follows.
Temp.
Ts
Set temp.
for Auto mode
d
Cooling/Heating mode can be changed when Thermo Off status is maintained during the time with SEG9.

Changing a particular option

You can change each digit of set option.
Option SEG1
Explanation PAGE
Remote
Controller
Display
Indication Details Indication Details Indication Details Indication Details Indication Details Indication Details
Indication
and Details
0
Note
• When changing a digit of an indoor unit address setting option, set the SEG3 as 'A' .
• When changing a digit of indoor unit installation option, set the SEG3 as '2' .
Ex) When setting the 'buzzer control' into disuse status.
Option SEG1 SEG2
Explanation PAGE MODE
Indication 0
(Continued)
Standard temp. for
→
Heating Cooling
c
b
Standard temp.
for Cooling
Standard temp.
→
for Cooling
Heating
SEG2 SEG3
The tens' digit of an
The option mode
MODE option SEG you will
you want to change
Option Tens' digit
D 1~6
mode of SEG
SEG3 SEG4
The tens' digit of an
The option mode you
option SEG you will
want to change
change
D 2
B C
A D
a
Standard temp.
for Heating
A : Set with SEG4(˚C)
B : Set with SEG5(˚C)
C : Set with SEG6(˚C)
D : Set with SEG8(˚C)
SEG4 SEG5
The unit digit of an
option SEG you will
change change
Unit digit
0~9 0~9
of SEG
SEG5
The unit digit of an
option SEG you will Changed value
change
1 7
27
SEG6
Changed value
The
changed 0~F
value
SEG6
1