Advertisement
Convection Heaters
BX Series
Installation, Operation, Maintenance Instructions & Spare Parts
WARNING. The BX convection heater is a heavy duty baseboard designed
for use in industrial environments and is not intended for use in residential
and commercial locations. The heater is not thermally protected and air
WARNING
flow obstruction with flammable materials could create a fire hazard. All
openings must be clear at all times.
Part No. MI114 Rev.9.02
Issued: July 2017 Printed in Canada
ISO 9001
Advertisement
Table of Contents
Related Manuals for Caloritech BX2011S
Summary of Contents for Caloritech BX2011S
- Page 1 ISO 9001 Convection Heaters BX Series Installation, Operation, Maintenance Instructions & Spare Parts WARNING. The BX convection heater is a heavy duty baseboard designed for use in industrial environments and is not intended for use in residential and commercial locations. The heater is not thermally protected and air WARNING flow obstruction with flammable materials could create a fire hazard.
- Page 2 TABLE OF CONTENTS A. Initial Inspection B. Installation C. Electrical Connections D. Temperature Control E. Maintenance F. Replacement Parts G. Elements INITIAL INSPECTION Upon receipt from the carrier, inspect the heater for The BX convection heater is CSA approved for operation possible damage in transit.
- Page 3 INSTALLATION The BX convection heater is symmetrically designed and CSA approved so that the electrical connection box can be located at either end. Before attaching the universal mounting legs, be sure to identify the end to be electrically connected. The BX is CSA approved as an industrial baseboard heater for floor or wall mounting.
- Page 4 ELECTRICAL CONNECTIONS Verify that the heater nameplate voltage and supply The schematic wiring diagrams shown below illustrate the voltage are the same (see A.2, page 2). BX convection heater with various control options. Some of this equipment is optional and may not be included with Select the proper electrical conductor size rated at 194°F your BX heater.
- Page 5 TEMPERATURE CONTROL BUILT-IN Thermostat - Heaters with a factory installed thermostat are prewired and require only power connection. The thermostat sensing bulb must be assembled into its final position. See B.4.7. for final assembly. The thermostat supplied is a high quality device with a factory calibrated range of 50 to 104°F (10 to 40°C).
- Page 6 Knob - Thermostat B11037-01 Mounting Legs D11131-04 Thermostat - SP B11031-01 Thermostat - DP B11115-01 ELEMENTS Heater Catalog No. Prefix Element Phase BX2011S IXS11132-10 BX2021S,BX2023S 1 & 3 IXS11132-13 BX2031S,BX2033S 1 & 3 IXS11132-14 BX2071S IXS11132-11 BX2073S IXS11132-15 BX2081S IXS11132-12...
- Page 7 NOTES...
- Page 8 PLEASE ADHERE TO INSTRUCTIONS IN THIS MANUAL Failure to do so may be dangerous and may void certain provisions of your warranty. For further assistance, please call 24hr hotline: 1-877-325-3473 (U.S.A. and Canada) Please have model and serial numbers available before calling. WARRANTY No warranty applies to paint finishes except for manufacturing Under normal use the Company warrants to...
Need help?
Do you have a question about the BX2011S and is the answer not in the manual?
Questions and answers