Setting The Clock - Magnavox VR400BMG Owner's Manual

14 Setting the Clock

Follow the steps below to set your VCR's clock. Make sure:
The VCR is on and in VCR position. (The VCR/TV light will
appear. If it does not, press the VCR/TV button once.)
1
Press the MENU button until the main menu appears.
- M E N U -
B TIMER PROGRAMMING
AUTO REPEAT [OFF]
PICTURE SELECT
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
AUTO SATELLITE LINK
2
Press the PLAY button or the STOP button repeatedly to
select CLOCK SET. Then, press the F.FWD button.
CLOCK SET
MONTH DAY YEAR
– – / – – – – – –
HOUR MINUTE AM/PM
– – : – – – –
3
While the MONTH space is flashing, press the PLAY but-
ton or the STOP button repeatedly until the desired
month appears. Then, press the F.FWD button.
CLOCK SET
MONTH DAY YEAR
0 3 / – – – – – –
HOUR MINUTE AM/PM
– – : – – – –
4
While the DAY space is flashing, press the PLAY button
or the STOP button repeatedly until the desired day
appears. Then, press the F.FWD button.
CLOCK SET
MONTH DAY YEAR
0 3 / 2 0 – – – –
HOUR MINUTE AM/PM
– – : – – – –
5
While the YEAR space is flashing, press the PLAY button
or the STOP button repeatedly until the desired year
appears. Press the F.FWD button. The day of the week will
appear automatically.
CLOCK SET
MONTH DAY YEAR
0 3 / 2 0 2 0 0 0
HOUR MINUTE AM/PM
– – : – – – –
POWER VCR/TV
1 2 3
4 5 6
7 8 9
0 +100
SPEED
SEARCH
QUICK-
SLOW TIME
FIND
1
MENU DISPLAY EXIT
RESET
REWIND / PLAY
RECORD / STOP
2-5
Helpful Hints
• If the clock has never been set, the
CLOCK SET menu may appear
immediately when you press the
MENU button. If this happens, fol-
low the instructions from step 3
above.
• To display the time, press the DIS-
PLAY button repeatedly until the
time appears on the screen.
• Power failures that last for more
than one minute can cause you to
lose your clock setting.
• Press the REWIND button to go
back one step from the current step
during steps 4-8.
EJECT
CHANNEL
INDEX
COUNTER
MEMORY
F.FWD
PAUSE/STILL