Install Hardware ....................12 Operate with IR .....................14 Control the Display ...................14 Control the Source ...................15 Operate with RS232 ....................16 RS232 Pinout ....................16 RS232 for Firmware Upgrading ................16 RS232 for Serial Communication ..............17 Troubleshooting ....................18 USER MANUAL - DUX-TX-70 / DUX-RX-70 HDMI EXTENDER...
Only use attachments/accesso- Refer all servicing to qualified ries specified by the manufac- service personnel. turer. USER MANUAL - DUX-TX-70 / DUX-RX-70 HDMI EXTENDER...
HDMI signals up to 70 meters / 230ft (1080p) or 40 meters/131ft (4K@30Hz) over a single CatX cable. Through PoE, one power supply to DUX-TX-70 will be able to power both DUX-TX-70 and DUX-RX-70. Via IR pass-through, you can either control the source from the display location or the display from the source location.
1 x Phoenix Male Connector (3.5 mm, 3 pins) 1 x IR Emitter 1 x Broadband IR Receiver (30 KHz ~ 50 KHz) 2 x Mounting Brackets 1 x User Manual USER MANUAL - DUX-TX-70 / DUX-RX-70 HDMI EXTENDER...
Electrical Fast Transient/Burst Power core: 2 kV Net Weight 400 g Dimension (W × H × D) 173 mm × 18 mm × 94.8 mm (6.84” × 0.71” × 3.75”) Certification CE, FCC USER MANUAL - DUX-TX-70 / DUX-RX-70 HDMI EXTENDER...
1080p@60Hz, 48 bpp Cat6a/7 40 m / 131 ft 1080p@60Hz, 3D 4K@30Hz 60 m / 197 ft 1080p@60Hz, 36 bpp 1080p@60Hz, 48 bpp Cat5e/6 35 m / 115 ft 1080p@60Hz, 3D 4K@30Hz USER MANUAL - DUX-TX-70 / DUX-RX-70 HDMI EXTENDER...
Page 8
On: HDCP video is being transmitted. HDCP LED Blinking: Non-HDCP video is being transmitted. Off: No HDMI signal. On: DUX-TX-70 and DUX-RX-70 are linked. LINK LED Off / Blinking: No link or link error. USER MANUAL - DUX-TX-70 / DUX-RX-70 HDMI EXTENDER...
Page 9
Fig 2: DUX-TX-70 - Rear Panel Item Name Description Connects the power adapter provided. If DUX-TX-70 is connected to a DC 12V power supply, DUX-RX-70 can be powered by DUX-TX-70 through PoE. DUX-TX-70 and DUX-RX-70 can also be powered individually.
Page 10
On: HDCP video is being transmitted. HDCP LED Blinking: Non-HDCP video is being transmitted. Off: No HDMI signal. On: DUX-TX-70 and DUX-RX-70 are linked. LINK LED Off / Blinking: No link or link error. USER MANUAL - DUX-TX-70 / DUX-RX-70 HDMI EXTENDER...
Page 11
Fig 4: DUX-RX-70 - Rear Panel Item Name Description Connects the power adapter provided. If DUX-TX-70 is connected to a DC 12V power supply, DUX-RX-70 can be powered by DUX-TX-70 through PoE. DUX-TX-70 and DUX-RX-70 can also be power individually.
3. Connect DUX-TX-70’s HDBT OUT port to DUX-RX-70’s HDBT IN port via a CatX cable. 4. Connect an IR Emitter to IR OUT port of DUX-TX-70 and a broadband IR Receiver to IR IN port of DUX-RX-70. (Or connect a broadband IR Receiver to IR IN port of DUX-TX-70 and an IR Emitter to IR OUT port of DUX-RX-70.)
Page 13
Blu-Ray Player Broadband IR Emitter IR Receiver HDMI Cable DUX-TX-70 HDBT OUT CATx Cable DUX-RX-70 HDBT IN HDMI Cable Broadband IR Emitter IR Receiver Display Blu-Ray Player Remote Fig 5: Installation Instruction Chart USER MANUAL - DUX-TX-70 / DUX-RX-70 HDMI EXTENDER...
Control the Display To control the display from the source location: 1. Connect a broadband IR Receiver to IR IN port of DUX-TX-70 ; 2. Connect an IR Emitter to IR OUT port of DUX-RX-70. When all set, the display can be controlled at the source end through a display remote.
Control the Source To control the souce from the display location: 1. Connect an IR Emitter to IR OUT port of DUX-TX-70; 2. Connect a broadband IR Receiver to IR IN port of DUX-RX-70. When all set, the source can be controlled at the display location through a source device remote.
Control System Fig 8: RS232 Pinout RS232 for Firmware Upgrading RS232 port of DUX-TX-70 and DUX-RX-70 can be used for firmware upgrading. To upgrade firmware of DUX-TX-70 or DUX-RX-70: 1. Download firmware upgrading execution software (please contact the product manufacturer or your local dealer) to your PC;...
RS232 port of DUX-TX-70 and DUX-RX-70 can also be used for serial communication.。 To start serial communications between DUX-TX-70 and DUX-RX-70: 1. Connect a RS232 Master (or Slave) Device to RS232 port of DUX-TX-70 using a RS232 cable; 2. Connect a RS232 Slave (or Master) Device to RS232 port of DUX-RX-70 using a RS232 cable;...
Check that the source input device has no such problem as snow, mosaic or with a damaged disc. If so, replace with another qualified input source. • Check that no compatibility issue exists between DUX-RX-70 and the display. If so, replace the display with qualified models. USER MANUAL - DUX-TX-70 / DUX-RX-70 HDMI EXTENDER...
Page 19
HDBT scaling receiver up to DUX-SRX 4K@60Hz 4:4:4 HDMI 1.4 & VGA over HDBT DUX-MTX TX up to 100m HDMI 1.4 & VGA over HDBT DUX-MTX-WP wall-plate TX up to 100 m USER MANUAL - DUX-TX-70 / DUX-RX-70 HDMI EXTENDER...