Advertisement
COOL
DEHUMIDIFY
HEAT
Press this button to turn the air conditioner
ON or OFF.
Press this button to select the desired operation
mode, AUTO, COOL, DEHUMIDIFY, FAN, and
HEAT.
Press these two buttons to set the desired
temperature.
Press this button to set the fan speed at Auto,
Low, Medium-low, Medium, Medium -high, and
High.
33
Power
Set temp
The swing buttons will allow you to select
horizontal (H) or vertical (V) swing of the air
guding louvers.
Pressing this button to select sleep mode.
Press to set automatic start and stop of the
conditioner.
Press to switch the indicating lights of the indoor
unit on or off.
Press to put the fan into the high speed to allow
for rapid cooling or heating.
After the unit is turned off the indoor fan will continue
operation for 10 minutes to remove the moisture
of the indoor unit to avoid the growth of mould and
bacteria.
In this mode the set temperature will not be displayed
on the remote control, and the unit will automatically
judge and select the suitable operation method to
make ambient comfortable.
Press Swing-V and ION-Filter buttons simultaneously
to lock or unlock the keyboard. If the remote control
is locked, the icon
will be displayed on it, in which
times. If the keyboard is unlocked, the mark will
disappear.
With the air conditioner switched off, press the
Swing-H and ION-Filter buttons simultaneously to
switch between °C and °F.
In COOL mode, press ION-Filter and Clock buttons
simultaneously to start or stop energy saving
function. The remote control display will show "SE" in
temperature display area when it is active.
In HEAT mode, pressing ION-Filter and Clock buttons
simultaneously will put the air conditioner into a low
heat mode that will operate to a temperature of 8°C.
Repeat the operation to quit.
Advertisement
