Advertisement
3
Press the Clock button and the clock symbol
Follow step 1 and 2 to set the new time.
The clock timer uses a 12 hour clock mode.
The default time for remote control is
12:00PM and it will revert to this when the
batteries are changed.
The remote control works as a remote
thermostat, providing an accurate temperature
control and maximum comfort.
Point the remote control to the indoor unit and
press I Feel button, a beep from the indoor unit
The I Feel symbol
the remote control until I Feel button is pressed
again.
The air conditioner will operate to reach the set
temperature at the location of the remote control.
The remote control sends the temperature
information at its location to the indoor unit every
ten (10) minutes. The air conditioner will quit I
FEEL operation and revert to normal operation
if no temperature information is received from
the remote control for successive eleven (11)
minutes.
Press the ION-Filter button to active the Cold
Plasma and Plasma Dust Collector functions.
will stay on the display of the
The symbol
remote control until the ION-Filter button is
pressed again.
The Cold Plasma generator releases plasma
which can help to eliminate bacteria, viruses,
dusts and other harmful agents in the air.
The Plasma Dust Collector can trap various
pollen from the air stream so as to keep the
room air clean.
This function is recommended when the indoor
air quality is poor.
43
will stay on the display of
The default setting for remote control is ON
when the remote control is turned on.
It is not necessary to use this function when
the room air quality is good.
Clean the Plasma dust Collector every
three to six months depending on the
condition.
1
The air conditioner resumes automatically with
the previous settings after a possible power
failure.
2
The front panel of indoor unit can be easily
removed for cleaning and maintenance.
3
This air conditioner can detect the malfunctions,
showing the diagnosis on the display of the
indoor unit by means of an error code.
The air conditioner will change operation
automatically for self-protection.
it might cause discomfort or uneven room
temperatures.
Both horizontal louver and vertical louver can be
adjusted with the remote control.
1 Perform this function while the unit is in
operation.
2 Press the Swing-V button on the remote control,
the horizontal louver will swing up and down
automatically.
Advertisement
