Canceling Effects - Epson EMP-810 User Manual

Compute
Main menu
Using the Menus Tip : Tilt the
3 The size of the sub-screen can be changed to one of five different sizes.
About menu User's Logo menu Audio menu Setting menu
Procedure
Wide-screen Projection
RGB-Video
• The selected area can be enlarged to between 1 – 4 times, in 25 steps of x 0.125. or right to move the item displayed around the screen.
The following values are the ratios for the vertical and horizontal lengths of
This function changes the aspect ratio of video images from 4:3 to 16:9 when
• The About menu shows the setting details for the current video source.
Press the [A/V Mute] button on either
the sub-screens to those of the main screen when the lengths of the main
• If a sub-screen has been set using the P in P function, the enlargement function is
Effect 1: The pointer icon moves.
The menus can be operated using either the remote control or the projector's
video images are being projected. Images which have been recorded in digital
the remote control or the projector's
• The Lamp setting appears as 0H for 0 – 10 hours, after that, it appears in
applied to both the main screen and the sub-screen.
screen sides are 1.
Effect 2: The spotlight moves.
control panel.
Video
video or onto DVDs can be viewed in 16:9 wide-screen format. In the case of
control panel.
units of 1 hour.
• Effect functions cannot be carried out while the E-Zoom function is being used.
Effect 3: Horizontal bars are moved vertically, and vertical bars are moved
Size 1
HDTV , the central part of the image can be displayed in the whole of the
The image and sound will then be paused.
Furthermore, keystone correction, tracking adjustment and sync adjustment cannot be
horizontally.
Approx. 1/3.2
Procedure
screen.
carried out using the projector's control panel buttons.
Computer
For effect 1, move the icon to the place where you would like it
4
Press the [A/V Mute] button on either the
• If the E-Zoom function is used while the keystone correction is near the limit value, a
1 Press the [Menu] button on either
When the [P in P] button is pressed, the initial sub-screen appears in size 2.
to be stamped, and then press the
remote control or the projector's control panel message may be displayed and it may not be possible to use E-Zoom. In such cases,
Procedure the remote control or the
reduce the keystone correction.
to continue normal projection. Tip : projector's control panel.
Press the [Resize] button on either the
4 Press the
• Only one type of effect can be displayed at any one time. If you press a different effect
The Main menu will be displayed.
S-Video,Video
remote control or the projector's control
position and size for the sub-screen.
button while using an effect function, the current effect will be canceled and the effect
You can use the [A/V Mute] function in the [Setting] menu to set the screen
panel. The image size will change each
Main menu Main menu Main menu function for the new button pressed will start.
appearance when the images and sound have been paused to any one of the
If you press the [P in P] button once more, the sub-screen will disappear.
time the button is pressed.
• The normal wireless mouse function of the remote control cannot be used while an
following three settings. (P.69)
User's Logo Setting Audio
effect function is in use.
2 Tip : Select a menu item.
• If an effect function is used while the keystone correction is near the limit value, a
• If you change the position of the sub-screen, the sub-screen will appear in the last
If using the control panel, press the
For SDTV
Video (R
message may be displayed and it may not be possible to use the effect function. In such
position which was set next time the P in P function is used.
[Sync +] or [Sync -] button.
cases, reduce the keystone correction.
Computer (Digital-RGB, Analog-RGB, RGB-Video, YCbCr, YPbPr)
• The E-Zoom function can be used at the same time that the P in P function is being used.
If using the remote control, press the top
• If the audio input connector for the main screen and the sub-screen have already been
or bottom of the
Main menu
Main menu

Canceling effects

set using the Audio Input command in the Audio menu, you can use the Effect buttons
to switch between the sound for the two screens.
About
Press a button other than the [1], [2], [3],
Default setting
Effect [1] button: Main screen audio
function will be canceled and the items which were drawn on the screen will
Effect [2] button: Sub-screen audio
3 Confirm the selection.
disappear.
Tip :
• If the P in P function is used keystone correction amount is near the limit, a message
For HDTV
Press the
The default user's logo is the EPSON logo. You can change the user's logo by recording
Video may appear on the screen and it may not be possible to use the P in P function at this
selection of a menu item.
and setting your own logo. (P.98) time.
The selected sub-menu will then be
In such cases, re-adjust the projector position so that the amount of keystone
displayed.
correction required is reduced.
4 Select a sub-menu item.
If using the control panel, press the
[Sync +] or [Sync -] button.
Changing the display position for 16:9 display
If using the remote control, press the top
While holding down the [Shift] button on the projector's control panel, press
or bottom of the
the [Resize] button. The display position changes as follows each time the
[Resize] button is pressed.
The items appearing in the Video menu
and the About menu will vary depending
on the type of input source being
projected.
Downloaded from ProjectorsManual.com Manuals Downloaded from ProjectorsManual.com Manuals Downloaded from ProjectorsManual.com Manuals Downloaded from ProjectorsManual.com Manuals Downloaded from ProjectorsManual.com Manuals Downloaded from ProjectorsManual.com Manuals Downloaded from ProjectorsManual.com Manuals Downloaded from ProjectorsManual.com Manuals Downloaded from ProjectorsManual.com Manuals Downloaded from ProjectorsManual.com Manuals Downloaded from ProjectorsManual.com Manuals Downloaded from ProjectorsManual.com Manuals
Sub-menu
button on the remote control up, down or to the left
Position (Analog-RGB only)
Moves the image display position vertically and
Size 2
horizontally.
Approx. 1/2.8
• Press the
display position adjustment screen which appears.
Tracking (Analog-RGB only)
Adjusts computer images when vertical stripes appear in
the images.
button on the remote control to accept the display
Sync. (Analog-RGB only)
Adjusts computer images when flickering, fuzziness or
interference appear in the images.
Sub-menu Sub-menu Sub-menu
• Flickering and fuzziness may also appear when the
brightness, contrast , sharpness or keystone settings
Execute V-Keystone Audio Input Sets the audio input port from Audio 1, Audio 2 or USB Corrects vertical keystone distortion in images. Records a user's logo. (P.98)
are adjusted.
to match the current video source.
• When keystone correction is carried out, the • Press the
• You can obtain the best results if you adjust the
projected image will become smaller. appearing on the screen.
Black Volume Adjusts the volume.
tracking first and then adjust the synchronization.
• If using both horizontal and vertical keystone
Treble Adjusts the treble setting.
Brightness Adjusts the image brightness. correction, first make the vertical correction and
then make the horizontal correction in that order.
• The keystone correction settings are memorized, so
Bass Adjusts the bass setting.
Contrast Adjusts the difference between light and shade in the
button.
that if you change the position or angle of the
Sub-menu
Sub-menu
images.
projector, you may need to readjust the keystone
• If Auto is selected, automatic gain adjustment is
Reset Resets all adjustment values for the Audio menu
correction settings.
Lamp Displays the cumulative lamp operating time.
carried out at periodical intervals.
functions to their default settings.
• If the images become uneven in appearance after
• When the lamp warning period is reached, the
• Press the
Sharpness Adjusts the image sharpness. keystone correction is carried out, decrease the
4:3 display
display characters appear in red.
screen, and select Yes.
Sharpness setting.
Reset Lamp Initializes the lamp operating time. When this
• Select Reset All to return all menu settings to their
• If you carry out both horizontal and vertical
Color Mode Corrects the vividness of the image color. The settings
Timer command is selected, the cumulative lamp operating
default settings. (P.74)
button to confirm the
keystone correction, the correction range will
Position can be saved separately for each type of source Moves the image display position vertically and
time is reset to the initial default value.
become smaller than it would be if only one type of
horizontally. (computer or video source). You can select from six
correction was carried out.
Video Source Displays the input source which is currently being
different quality settings depending on the surroundings.
• Press the
projected.
H-Keystone Corrects horizontal keystone distortion in images. • sRGB the display position adjustment screen which appears.
• Normal : For presentation in bright rooms where
• When keystone correction is carried out, the image
Input Signal Displays the input signal settings.
Brightness Adjusts the image brightness.
becomes smaller.
Frequency Displays the horizontal scanning frequency.
• Meeting : Images are modulated using their original
• If using both horizontal and vertical keystone
Contrast Adjusts the difference between light and shade in the
correction, first make the vertical correction and
SYNC Polarity Displays the synchronization polarity.
16:9 display
images.
then make the horizontal correction in that order.
• Presentation: For presentations in dark rooms.
SYNC Mode Displays the synchronization attributes.
• The keystone correction settings are memorized, so
• Theater : Movie images are optimized using natural
Color (Not available for RGB-Video)
Resolution Displays the input resolution.
that if you change the position or angle of the
Adjusts the color intensity for the images.
projector, you may need to readjust the keystone
• Amusement: Produced modulated images with natural
Refresh Rate Displays the refresh rate.
Tint (Not available for RGB-Video)
correction settings.
button.
Adjust the image tint.
• If the images become uneven in appearance after
Resolution (Analog-RGB only)
Adjustment is only possible for NTSC signals.
keystone correction is carried out, decrease the
Select Auto or Manual.
Sharpness setting.
Sharpness Adjusts the image sharpness.
• If Auto is selected, automatic setup is carried out.
• If you carry out both horizontal and vertical
• If Manual is selected, you can select the image
keystone correction, the correction range will
resolution for adjustment from a list.
become smaller than it would be if only one type of
correction was carried out.
Preset (Analog-RGB only)
Saves the current input resolution to the preset list.
Center
Functi De
Component (YCbCr, YPbPr)
Shift
Size 3 Size 4
A/V Mute
Approx. 1/2.5 Approx. 1/2.3
button and make the adjustment using the
Computer/YCbCr
button.
Projector
Menu
Tracking -
A/V Mute
Function Function Function
Projector
Projector
button and follow the procedure
Blue
Functi De
Function
or [Left] buttons. The effect
button to display the confirmation
16:9 display
button and make the adjustment using
: Images conform to the sRGB standard.*
brightness is emphasized.
tints, with no color enhancement.
4:3 display
tints.
tints. Ideal for games.
Top
set
Keystone
Sync-
A/V Mute Freeze
Depends
Resize
on
E-Zoom
Size 5
Volume
connection
Approx. 1/2.1
Video
Depends
Menu
Remote control
on
Source
Esc
connection
Comp1
Comp2/YCbCr
Sync+
Auto Resize
Resize
0 Source
Tracking +
Auto
P in P Preset
Video S-Video
Volume
Default Default Default
Volume
setting setting setting
Remote control
Median EPSON Depends on
value (0) connection logo
Remote control
User's logo 15
Median
Median
value (0)
value (0)
Median
Auto
Default
value (0)
set setting
-
0H
Median
value (0)
-
Normal
Depends
on
connection
Median
value (0)
Median
value (0)
Median
-
value (0)
-
Median
-
value (0)
-
Median
value (0)
Auto
Median
value (0)
-
Bottom
Power
Help
53