Auto-Assembling; Automatic Recording From A Satellite Receiver (Sat Recording); Switching On 'Direct Record - Philips VR200/58 Operating Instructions Manual

Auto-assembling

You can use the auto-assembling function to join individual
recordings without any major picture disturbance between
them.
a
While the cassette is playing, search for the correct
position on the tape.
b
Stop the cassette by pressing the
will appear in the display.
c
Now start recording as usual by pressing the
button on the remote control.
RECORD/OTR n
Automatic recording from a satellite
receiver (SAT RECORDING)
You can only use this function, when you have a satellite
receiver which can control other equipment by a
'programming' function.
a
Use a scart cable to connect the scart socket
to the scart socket on the satellite receiver.
EXT.2 AV 2
b
Put a cassette in the machine. Switch off with the
button on the remote control.
TV/STANDBY m
c
Hold the buton on the remote control, until
MONITOR
'SAT.P' appears on the video recorder display.
The video recorder is now ready to record. The
plug controls the start and the end of the
EXT.2 AV 2
recording.
D When this function is switched on and the video
recorder is switched off, '
recorder display.
D If you want to cancel this function before the
recording has started, you must hold the
button until 'SAT.P' disappears.
MONITOR
D If you want to cancel this function while a
programme is being recorded, press the
button on the remote control.
TV/STANDBY m
16
STOP h button. ' 9 '
x ' appears on the video

Switching on 'Direct Record'

When this function is switched on, the video recorder will
automatically record the programme selected on the television
by means of a scart cable.
D The video recorder must be switched off .
a
Switch on the TV set and select the programme number
for the video recorder.
b
Press the button on the remote control. The main
MENU
menu will appear.
c
Select the line 'DIRECT RECORD' with the
P q button.
d
Confirm with the
OK
e
Select the function 'ON' with the
select 'OFF', the function will be switched off.
f
Confirm with the
OK
g
On the TV set, select the programme number you want to
record from.
h
Press the RECORD/OTR n
switched off.
D Don't select another programme number on your TV
set, until the 'search symbol' on the video recorder
display has disappeared. This can take up to one
minute.
D If 'NOTV' appears on the video recorder display, this
means the video recorder cannot find this
programme number. In this case, read the section
'Recording without automatic switch-off'.
P r
button.
P q button. If you
button.
button with the video recorder
or