Table of Contents
Advertisement
3.
RECORDING
1
Insert a cassette or switch the video recorder on with the
P q
button.
P r
P q
2
Use the
or
select the programme number from which you wish to
record, e.g.: 'P 01' .
RECORD n
3
Press the
button.
4
To stop recording, press the
Long play function
You can reduce the recording speed by half. This makes it
possible to record, for example, 8 hours instead of 4 hours on
an 'E240' cassette.
Before recording, with the video recorder switched on, select
the 'LP' (=LongPlay) recording speed by pressing the
SP/LP
button. 'LP' will appear in the display.
Note: During picture scanning, still picture and slow
motion colour playback may be poor.
* You will obtain the best picture quality when recording
at standard speed ('SP').
0-9
button or the
buttons to
BBC1
0:00
STOP h
button.
Some general notes for recording
•
Recording from external sources: Programme numbers
'E1' and 'E2' are provided for recording from external
EXT.1
sources (via the
•
OTR - recording: If you do not want to record to the end
of the cassette, press the
display shows at what time the recording will stop. With
each subsequent press of the
add 30 minutes to this time.
You can return to the normal recording status by pressing
CLEAR (CL)
the
button.
•
Stereo reception: This video recorder can record stereo
transmissions. The playback of HiFi recordings has HiFi
quality.
•
Erase protection: So that you don't accidentally delete an
important recording, you can remove the special tab
(erase protection) on the narrow side of the cassette with
a screwdriver or slide the special tab to the left.
Later, if you no longer want the cassette to be erase
protected, you can seal the gap again with adhesive tape
or slide the special tab to the right.
•
Auto-assembling: You can use the auto-assembling func-
tion to join individual recordings without any major
picture disturbance between the recordings. During
playback, search for the correct position on the tape and
STOP h
then press the
display. Now you can start recording as usual by
RECORD n
pressing the
During Stop
h
or Pause
display for TV-channel name and tape position, using the
OK
button.
EXT.2
or
scart socket).
RECORD n
button again. The
RECORD n
button you can
9
button.
will appear in the
button.
9
you can switch between the
7
Advertisement
Table of Contents
