Display Ip Routing-Table - HPE FlexFabric 7900 Series Layer 3 Ip Routing Command Reference

Examples
# Display the ECMP mode.
<Sysname> display ecmp mode
ECMP-mode in use: Default
ECMP-mode at the next reboot: Enhanced

display ip routing-table

Use display ip routing-table to display routing table information.
Syntax
In standalone mode:
display ip routing-table [ vpn-instance vpn-instance-name ] [ verbose ] [ standby slot
slot-number ]
In IRF mode:
display ip routing-table [ vpn-instance vpn-instance-name ] [ verbose ] [ standby chassis
chassis-number slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a
case-sensitive string of 1 to 31 characters. Without this option, the command displays the routing
table information for the public network.
verbose: Displays detailed routing table information, including information about both active and
inactive routes. Without this keyword, the command displays only brief information about active
routes.
standby slot slot-number: Displays backup routing table information for a card. Without this option,
the command displays routing table information. (In standalone mode.)
standby chassis chassis-number slot slot-number: Displays backup routing table information for a
card on an IRF member device. The chassis-number argument specifies the ID of the IRF member
device. The slot-number argument specifies the slot number of the card. Without this option, the
command displays routing table information. (In IRF mode.)
Examples
# Display brief information about active routes in the routing table.
<Sysname> display ip routing-table
Destinations : 13
Destination/Mask
0.0.0.0/32
1.1.1.0/24
Routes : 13
Proto Pre Cost
Direct 0 0
Static 60 0
2
NextHop Interface
127.0.0.1 InLoop0
192.168.47.4 Vlan1