Subscribe to Our Youtube Channel
Summary of Contents for Tank Utility Cellular Tank Level Monitor
- Page 1 Tank Utility Cellular Tank Level Monitor Installation Instructions for Qualified Fuel Professionals...
-
Page 2: Watch The Video
COMPATIBILITY PROPANE The Tank Utility remote level monitor can be installed on all tanks equipped with a Remote-Ready Dial. DIAL REPLACEMENT Tank Utility sells and supports the installation of replacement Remote-Ready Dials. For propane tanks, this upgrade can often be completed without depressurizing the tank. - Page 3 CONTENTS Lock Loop Zip-Tie Mounting Tank Mounting Status Icons Status LEDs Activation Pad Sensor Cable Activation Magnet and Cable Wrap Sensor Boot Tank Monitor Self-Tapping Mounting Screws Mounting Washers...
- Page 4 STEP 1: Attaching The Sensor To Your Tank’s Dial dust cap, If your Remote-Ready Dial has a black you will first need to remove it by simultaneously pulling up on the tab while sliding the dust cap out of the dial. If applicable, route the cable through the hole in the tank’s collar or lid.
- Page 5 STEP 2: Turn Your Monitor On And Prompt A Reading Hold the activation magnet (attached to the activation pad cable) to the (denoted by the magnet icon) on the monitor for 3 seconds, then remove when the 3 LEDs blink aqua blue.
-
Page 6: Step 3: Mount The Monitor
STEP 3: Mount The Monitor FOR ABOVE GROUND TANKS The underside of the monitor has two protruding magnetic feet which can be used to mount the monitor on either the tank or the lid. vertical tanks, mount the monitor horizontal tanks, mount the with the cable pointing downwards. - Page 7 STEP 4: Configure The Device In The Tank Utility Portal Your monitor is already associated with your Tank Utility account. To edit the details of http://portal.tankutility.com the monitor, go to and login with your credentials. Your monitor will appear in the portal when a reading is sent.
-
Page 8: Troubleshooting Setup
Troubleshooting Setup When the monitor is prompted to send a reading each LED will blink in succession. Each LED will turn aqua blue when the corresponding step is completed. If a problem is encountered, the LED will turn red. BATTERY VOLTAGE CELL SIGNAL STRENGTH READING CONFIRMATION The monitor cannot connect... -
Page 9: Battery Replacement
Battery Replacement To replace your batteries, remove the 4 screws from the tabs on the enclosure and remove the lid. Batteries must be unused Energizer Ultimate Lithium L91. Using used batteries or a different make/models void the warranty. -
Page 10: Two-Year Limited Warranty
3. WARRANTY CONDITIONS; HOW TO GET SERVICE IF YOU WANT TO CLAIM UNDER THIS LIMITED WARRANTY Before making a claim under this Limited Warranty, the owner of the Product must (a) notify Tank Utility of the intention to claim by visiting tankutility.com/support during the Warranty Period and providing a description of the alleged failure, and (b) comply with Tank Utility's return shipping instructions. - Page 11 CONDITIONS TO THE DURATION OF THIS LIMITED WARRANTY. 6. LIMITATION OF DAMAGES IN ADDITION TO THE ABOVE WARRANTY DISCLAIMERS, IN NO EVENT WILL TANK UTILITY BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, EXEMPLARY, OR SPECIAL DAMAGES, INCLUDING ANY DAMAGES FOR LOST DATA OR LOST PROFITS, ARISING FROM OR...
- Page 12 Tank Utility, Inc. (802) 393-8265 Support@TankUtility.com...
Need help?
Do you have a question about the Cellular Tank Level Monitor and is the answer not in the manual?
Questions and answers