Download  Print this page

Time Zone Setting; Time And Calendar Setting; Viewing The Channel - Sharp SPC900 User Instructions

Radio controlled wireless thermo clock
Hide thumbs

Advertisement

2.
The temperature pre-alarm can sound 30 minutes
earlier than the alarm only when the outdoor
temperature is below 26.0°F (-3.0°C).
3.
If no key is pressed during the alarm period, the clock
will enter the snooze mode automatically. Besides,
you can also press "SNOOZE" key once to stop the
current alarm and activate the snooze function.
4.
Once the snooze function is activated, the 4-step
crescendo alarm will sound 13 times in 5-minute
interval. The alarm duration is 60 seconds.
Temp. alarm ON

VIEWING THE CHANNEL

The default channel is Channel 1. Press "CHANNEL" key to
view the channels from 1 to 2.
Besides, press and hold "CHANNEL" key for 2 seconds to
show the channels automatically; press it once again to
exit the automatic display mode.
12

TIME ZONE SETTING

The default time zone is PACIFIC. If your location is not in
the Pacific, set the time zone as follows:
1.
In normal time mode, press "TIME" key to enter the
alarm time mode.
2.
Press "UP" key to select the proper time zone: P=Pacific
Alarm1 ON
M=Mountain C=Central E=Eastern
3.
Press "TIME" key to save the setting and return to
normal time mode.

TIME AND CALENDAR SETTING

If you are out of reach of the Radio Controlled transmitter or
if the reception is not reachable, the time and calendar can
be set manually. As soon as the signal of transmitter is
received again, the clock will automatically synchronize with
the exact time and calendar.
1.
Press and hold "TIME" key for 2 seconds until the Year
digit flashes.
2.
Press "UP" or "DOWN" key to change its value.
3.
Press "TIME" key once until the Month digit flashes.
4.
Press "UP" or "DOWN" key to change its value.
9

Advertisement

loading

  Also See for Sharp SPC900

  Related Manuals for Sharp SPC900