Rear Panel 15 - Philips VPA115AT Owner's Manual

AC Power Cord
Connect to a standard AC outlet
to supply power to the VCP.
Make sure the car battery cord is
disconnected from the VCP.
AUDIO OUTPUT Jack
Use an audio cable (not supplied) to
connect this jack to the Audio In
jack of a TV, camcorder, VCR, or
audio system.
Details are on page 10.
CH3/CH4 Switch
Set to channel 3 or 4 to
use your TV with your
VCP. Details are on pages
six-nine.
VIDEO OUTPUT Jack
Use a video cable (not supplied) to
connect this jack to the Video In jack
of a TV, camcorder, VCR, or moni-
tor. Details are on page 10.
13.2V Jack
Connect the car battery cord here
when you use the VCP in your vehicle.
Details are on page 11.

Rear Panel 15

ANT(enna) OUT Jack
Use the supplied RF coaxial cable
to connect this jack to the
ANTENNA IN jack on your TV
or Cable Box.
Details are on pages six-nine.
ANT OUT
CH3
AUDIO
CH4
OUTPUT
13.2V
ANT IN
VIDEO
ANT(enna) IN Jack
Connect your antenna or cable
here. Details are on pages six-10.