Installing Sf/Cpm Modules; Warnings And Notes - Alcatel 7750 SR-12 Installation Manual

Installing SF/CPM Modules

I SF/CPM M
NSTALLING
W
ARNINGS AND
Warning:
• Electrostatic discharge (ESD) damage can occur if IOMs, SF/CPMs, or MDAs are mishandled.
Always wear an ESD-preventive wrist or ankle strap and always connect an ESD strap to the
grounding plug on the front of the chassis.
• Always place router components on an anti-static surface.
• Do not power up the 7750 SR-12 until all components are installed and verified.
• Blank panels and faceplates are required in all empty card and component slots to prevent excess
dust accumulation and to help control airflow and electromagnetic interference. Faceplate blanks
do not have board components or connector pins.
Notes:
General:
• SF/CPM modules do not require preconfiguration.
• The 7750 SR-12 router requires at least one SF/CPM.
• Install the SF/CPM before installing any IOMs.
• Do not force an IOM into a SF/CPM slot.
• Do not force a SF/CPM into an IOM slot.
7750 SR-12
• The SR-12 card slots are vertically oriented.
• In the SR-12, SF/CPMs must be installed in the center slots labelled A and B.
• IOMs are designed to fit in slots numbered from left to right, 1 through 10.
Page 84
ODULES
N
OTES
:
7750 SR-12