Remote Locator 29 - Philips/Magnavox VCR 462 Owner's Manual

Philips video cassette recorder owner's manual

Hide thumbs

Table Of Contents

Table of Contents

When you use the Remote Locator feature, your VCR can find

your remote control. To find your remote, follow these steps.

Press the POWER button on the VCR to turn on the VCR.

LOCATING REMOTE appears on the TV screen briefly. Within a

few seconds, the remote control will start beeping. It will beep for

about 30 seconds.

When you find the remote control, point the remote at the

VCR's remote sensor and press any button to stop the

beeping.

The VCR may find other remote controls in your home, or even in an

apartment complex. To program the VCR to find its remote control only,

follow these steps.

Press the VCR button, then press the MENU button.

Press the Number 6 button to select SET REMOTE LOCA-

TOR.

TO CHANGE CODE,

PUSH MUTE AND PAUSE KEY

FOR 3 SECONDS.

TO END PUSH EXIT

Press and hold the MUTE button and the PAUSE/STILL

button at the same time for three seconds. The current

remote locator code will appear on-screen.

SET LOCATOR CODE

REMOTE LOCATOR CODE IS 4

TO SELECT PUSH 0-9

Press one Number button (0 - 9) on the remote control

to set a new locator code. (If you press any other button, the

code won't be set.) The remote control will beep briefly, indicat-

ing that the locator code has been changed successfully. The new

code will appear in the menu, then the menu will disappear.

SET LOCATOR CODE

REMOTE LOCATOR CODE

HAS BEEN CHANGED

NEW CODE IS 6