Turning On Your Vcr - Philips/Magnavox VCR 462 Owner's Manual

6
Press the MENU button. The menu shown below will appear.
CONNECT ANTENNA OR CABLE
TO VCR
THEN...
PUSH CH UP KEY
OR...
FOR PLAY ONLY – PUSH STOP
7
Press the CHANNEL Up button to begin automatic channel
programming. AUTO SET PROCEEDING/PLEASE WAIT will
appear on-screen. The VCR will place all of the channels you
receive into its memory, so when you scan through channels using
the CHANNEL Up/Down buttons, you'll only scan through chan-
nels that you receive.
8
When channels are programmed, AUTO SET COMPLETED will
appear on-screen briefly.
Then, the following menu will appear, giving you the option to set
up the VCR Plus+ Programming System now, if you prefer.
VCR PLUS+ USER
TO SET UP VCR PLUS+
CROSS REFERENCE CHANNEL
MAP, REFER TO
INSTRUCTION BOOK.
PUSH MENU TO SET REF MAP
OR...
TO END PUSH EXIT
9
If you do not want to set up the VCR Plus+ Programming
System now, press the EXIT/STATUS button. You may set
up the VCR Plus+ Programming System later by following the
instructions on pages 38 - 39.
If you do want to set up the VCR Plus+ Programming
System now, press the MENU button. Follow the instruc-
tions from step 6 on page 39 to complete this task.
Turning on Your VCR (cont'd) 11
8 Wait for the VCR to program
channels.
9
VCR PLUS+
/ENTER
EXIT/STATUS
6
REC
SPEED
Helpful Hint
• You may not be able to program
channels at step 7 if you are using
a Cable Box or DSS Receiver.
CBL/DSS VCR TV
EJECT POWER MUTE
VOL CHANNEL
F.ADV
7
PAUSE/STILL
PLAY
REW FF
LIGHT
STOP
MENU CLEAR
1 2 3
4 5 6
7 8 9
100 0
GO-TO
/OTR
INDEX MEMORY
...
VAR. SLOW
TRACKING SKIP
VCR/TV SLOW SEARCH
REMOTE LOCATOR