Sorting Tv Channels Manually; Automatic Tuning - Philips turbo drive VR550 Product Manual

HK471BD_EN 4/12/06 6:32 PM Page 6
'NO TV SIGNALS' appears in the TV screen.
The video recorder is not receiving a video sig-
nal from the TV.
Check the plug on the scart cable.
Check your TV's operating instructions to see
which scart socket is used for video signals.
If this does not help, it's not possible to use this
function. Please read the section 'Sorting TV
channels manually'.
8. 8.
Wait until the next number, e.g. 'P:02' appears
in the display.
9.
9.
Select the next programme number on the
TV, e.g. '2'.
10.
10. Confirm with
FWD 1- B
11.
11.
Repeat steps 8 to 10 until you have assigned
a programme number to all TV channels.
12.
12. To end, press

Automatic Tuning

During installation, all available TV channels are
searched for and saved. If the channel assign-
ments of your cable or satellite TV provider
change or if you are re-installing the video
recorder, e.g. after moving house, you can start
this procedure again. This will replace all the TV
channels already saved with the new ones.
1.
1.
Switch on the TV. If required, select the pro-
gramme number for the video recorder.
2.
2. Press . The main menu will appear.
MENU
3.
3. Select 'TUNER SET UP' with
and confirm with
STOP C-L
4.
4. Select 'AUTO TUNING' with
and confirm with
STOP C-L
PLEASE WAIT
START
5.
5.
The automatic TV channel search starts. This
allows the video recorder to save all available
TV channels. This procedure may take sever-
al minutes.
6.
6. When the TV channel search is complete,
'COMPLETED' will briefly appear on the TV
screen.
.
.
STATUS/EXIT
or
PLAY B-K
.
FWD 1- B
or
PLAY B-K
.
FWD 1- B
FINISH

Sorting TV channels manually

After you have performed the automatic channel
search you may not agree with the sequence in
which the individual TV channels have been allo-
cated to the programme positions (programme
numbers) of the video recorder. You can use this
function to individually sort the TV channels
already saved.
1.
1. Switch on the TV. If required, select the pro-
gramme number for the video recorder.
2.
2.
Press . The main menu will appear.
MENU
3.
3.
Select 'TUNER SET UP' with
and confirm with
STOP C-L
4.
4.
Select 'MOVE' with
PLAY B-K
and confirm with
FWD 1- B
MOVE
P01: 02
P02: 03
P03: 05
P04: 10
P05: 74
SELECT K L CHOOSE B
END=EXIT
5. 5.
With or
PLAY B-K STOP C-L
TV channel that you want to change.
6. 6.
Confirm with
FWD 1- B
7.
7. Move the selected channel with
to the programme number you want
STOP C-L
to assign.
8.
8. Confirm with
FWD 1- B
9. 9.
To assign other TV channels to a programme
number, repeat steps 5 to 8.
10.
10. To end, press
STATUS/EXIT
6
PLAY B-K
.
FWD 1- B
or ,
STOP C-L
.
P06: 90
P07: 99
P08: 121
P09: 124
P10: 130
, select the saved
.
or
PLAY B-K
.
.
EN