Philips turbo drive VR550 Product Manual

Philips turbo drive VR550 Product Manual

Video cassettes recorder product manual
Hide thumbs Also See for turbo drive VR550:

Advertisement

HK471BD_EN 4/12/06 6:32 PM Page 1
Thank you for buying a Philips video recorder. This video recorder is one of the most sophisticated
and easy-to-use video recorders (VCR) on the market. Please take the time to read this operating
manual before using your video recorder. It contains important information and notes regarding opera-
tion. The video recorder should not be turned on immediately after transportation from a cold to a
hot area or vice versa, or in conditions of extreme humidity. Wait at least three hours after transport-
ing the device. The video recorder needs this time in order to become acclimatised to its new environ-
ment (temperature, air humidity, etc.).
This video recorder is used for the recording and playback of VHS videocassettes.
Cassettes with the VHS-C label (VHS cassettes for camcorders) may only be used
with a suitable adapter.
We hope you enjoy your new video recorder.
PAL

Important notes regarding operation

"
Danger: High voltage!
Do not remove the top cover as there is
a risk of an electrical shock!
"
To reduce the risk of fire or electric shock,
do not expose this device rain or moisture.
The video recorder does not contain any
"
components that can be repaired by the
customer. Please leave all maintenance
work for qualified personnel.
As soon as the video recorder is connected
"
to the power supply, there are some compo-
nents that are in constant operation. To
switch off the video recorder completely you
must disconnect it from the power supply.
"
The mains plug shall remain readily operable.
Keep the distances 20 cm around apparatus of
!
ventilation openings. Do not place the device
on an unsteady base.
Make sure that no objects or liquids enter the
!
video recorder. Do not place vases or the like on
the video recorder. If liquid is spilt into it, immedi-
ately disconnect the video recorder from the power
supply and call After-sales Service for advice.
Do not place any combustible objects on
!
the device (candles, etc.).
Make sure that children do not place any foreign
!
objects within the openings or ventilation slots.
These operating instructions have been
printed on non-polluting paper.
Deposit old batteries at the appropriate col-
lection points.
Please make use of the facilities available in
your country for disposing of the packaging
of the video recorder in a way that helps to
protect the environment.
1VMN20683B***
HK471/47RBD
HM471BD
Disposal of your old product
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When this crossed-out wheeled bin
symbol is attached to a product it
means the product is covered by the
European Directive 2002/96/EC.
Please inform yourself about the local
separate collection system for electri-
cal and electronic products.
Please act according to your local rules and do
not dispose of your old products with your nor-
mal household waste.
The correct disposal of your old product will help
prevent potential negative consequences for the
environment and human health.
So that you can identify your machine for service
questions or in the event of theft, enter the serial
number here. The serial number (PROD. NO.) is
printed on the type plate fixed at the back of the
device. Also, we suggest that you put a mark
with your VCR MODEL NO.
MODEL NO.
VR550/07
PROD. NO.
...........................
This product complies with the requirements of
Directive 73/23/EEC +89/336/EEC +93/68 EEC.
Interference
The Department of Trade and industry operates a
radio Investigation Service to help TV licence hold-
ers improve reception of BBC and ITC program-
mers where these are being spoilt by interference.
1
VR550/07
EN

Advertisement

Table of Contents
loading

Summary of Contents for Philips turbo drive VR550

  • Page 1: Important Notes Regarding Operation

    HK471BD_EN 4/12/06 6:32 PM Page 1 Thank you for buying a Philips video recorder. This video recorder is one of the most sophisticated and easy-to-use video recorders (VCR) on the market. Please take the time to read this operating manual before using your video recorder. It contains important information and notes regarding opera- tion.
  • Page 2: Specifications

    HK471BD_EN 4/12/06 6:32 PM Page 2 Specifications Voltage: 220-240V/50Hz Power consumption: max. 25W Power consumption (Standby): less than 3W Rewind time: 68-78 seconds (cassette E-180) Dimensions in cm (WxDxH): 36.0x22.6x9.2 Number of video heads : 4 Number of audio heads (Hi-Fi): 2 Recording/playback time: 3 hours (SP) (cassette E-180) 6 hours (LP) (cassette E-180)
  • Page 3: Connecting Additional Devices

    If the connection was properly made and your TV was automatically switched to the programme number for the scart socket, you will see the following picture: PLEASE CONNECT AERIAL OR CABLE TO THE VCR THEN... PUSH P+ KEY OR... FOR PLAY ONLY-PUSH PLAY Then, read the section 'Preparation for use' in the chapter 'Installing your video recorder'.
  • Page 4: Installing Your Video Recorder

    HK471BD_EN 4/12/06 6:32 PM Page 4 2. Installing your video recorder Preparation for use This chapter shows you how to prepare the video recorder for use. The video recorder automatically seeks out and stores all available TV channels. 'Aim' correctly In the following sections, you require the remote control for the first time.
  • Page 5: Manual Tv Channel Search

    HK471BD_EN 4/12/06 6:32 PM Page 5 Manual TV channel search In some cases it can occur that all of the TV channels are not found and saved during the first installation. In this case, the missing or coded TV channels must be searched for and stored man- ually.
  • Page 6: Sorting Tv Channels Manually

    HK471BD_EN 4/12/06 6:32 PM Page 6 'NO TV SIGNALS' appears in the TV screen. The video recorder is not receiving a video sig- nal from the TV. Check the plug on the scart cable. Check your TV’s operating instructions to see which scart socket is used for video signals.
  • Page 7: Setting The Clock

    HK471BD_EN 4/12/06 6:32 PM Page 7 Setting the clock If the display shows an incorrect time or ' --:-- ', the time and date must be reset manually. Switch on the TV. If required, select the pro- gramme number for the video recorder. Press .
  • Page 8: Displaying Current Tape Position

    'PLAY' will PLAY B-K appear on the display. DIGITAL STUDIO PICTURE CONTROL Philips has developed a system which produces the best possible playback quality. For old and often-used video cassettes, this system reduces interference. For new or high quality cassettes, it emphasises the details.
  • Page 9: Manual Recording

    HK471BD_EN 4/12/06 6:32 PM Page 9 Searching for tape position without picture (forward wind and rewind) Stop the tape with STOP C-L Press (reverse) or REW0- s (forward). 'Fr' or 'FF' will appear on the dis- play for 5 seconds, and then, the remaining tape time will appear.
  • Page 10: Automatic Controlled Recording From A Satellite Receiver (Record Link)

    HK471BD_EN 4/12/06 6:32 PM Page 10 Selecting the recording speed (SP or LP) LP allows to double the recording duration on tape (for example six hours instead of three hours on a E180 cassette). Switch on the TV. If required, select the pro- gramme number for the video recorder.
  • Page 11: Programming A Recording (Timer)

    With Turbo Timer, programming a recording that takes place within the next 24 hours is quick and easy. You don’t even need to switch your TV ‘on’ as the neces- sary information will appear in the VCR display. (the figures below are only shown as examples) Press...
  • Page 12: How To Change A Programmed Recording (Timer)

    Undo the erase protection (chapter 'Manual recording', section 'Preventing acci- dental erasing') or insert a different cassette. 'TURN OFF VCR FOR TIMER RECORDING' flashes on the TV screen • The video recorder is switched on several min- utes before the start of a programmed recording.
  • Page 13: Other Functions

    Switch on the TV. If required, select the pro- gramme number for the video recorder. Press . The main menu will appear. MENU Select 'VCR SET UP' with PLAY B-K and confirm with FWD 1- B Select 'STATUS DISPLAY' with...
  • Page 14: Selecting The Sound Channel

    To end, press STATUS/EXIT Clock Display This function allows you to switch the VCR dis- play off. It is useful in case you feel disturbed by the display-brightness while watching TV in a dark room. It also reduces the power consump- tion.
  • Page 15: Before You Call An Engineer

    HK471BD_EN 4/12/06 6:32 PM Page 15 7. Before you call an engineer If, contrary to expectation, you have any prob- lems using this video recorder, it may be caused by the following reasons. Your video recorder does not respond to any button being pressed: •...
  • Page 16 PHILIPS PORTUGUESA, S.A. Consumer Information Centre Rua Dr. António Loureiro Borge, nr. 5 Arquiparque, Miraflores P-2795 L-A-VEHLA PORTUGAL Phone: 021-4163063 PHILIPS CE, The Philips Centre, 420 - 430 London Road, Croydon, Surrey CR9 3 QR UNITED KINGDOM Phone: 0208-665-6350 PHILIPS KUNDECENTER Frederikskaj 6, 1780 København V...

This manual is also suitable for:

Vr550/07

Table of Contents