Programming A Recording (Timer); Turbo Timer - Philips turbo drive VR550 Product Manual

Video cassettes recorder product manual
Hide thumbs Also See for turbo drive VR550:
Table of Contents

Advertisement

HK471BD_EN 4/12/06 6:32 PM Page 11

5. Programming a recording (TIMER)

General information
Use a TIMER programming to automatically start
and stop a recording at a later time or date. The
video recorder will switch to the right programme
number and begin recording at the correct time.
With this video recorder, you can pre-programme
up to eight recordings within a period of one
year. To make a programmed recording, your
video recorder needs to know:
* the date you want to make the recording
* the programme number of the TV channel
* the start and stop time of the recording
This information is saved in a 'TIMER' block.
Programming a recording
1.
1.
Switch on the TV. If required, select the pro-
gramme number for the video recorder.
2.
2.
Press
. The main menu will appear.
MENU
3.
3.
Select 'TIMER' with
Then press
FWD 1- B
4.
4.
Select 'ONCE', 'DAILY' or 'WEEKLY' recording
with
or
PLAY B-K
.
FWD 1- B
SELECT K L CHOOSE B
ONCE
DAILY
WEEKLY
TIMER LIST
END=EXIT
Selecting once/daily/weekly recordings
'ONCE': Recording once
'DAILY': Repeated daily recordings from
Monday to Friday
'WEEKLY.': Repeated weekly recordings (every
week on the same day)
Error message : 'FULL'
If this error message appears after you select
'ONCE', 'DAILY' or 'WEEKLY' on TIMER menu
and press
FWD 1- B
are already programmed. No more recordings
can be programmed. If you want to clear or
check a programmed recording(TIMER block),
select the programme number on TIMER LIST
menu and press
CLEAR
5.
5.
Select TIMER block with
6.
6.
Enter the Start time (START), End time
(STOP), Programme number (PROG.) and
the 'DATE' with
Programme numbers of the 'AV1' and 'AV2'
scart socket
You can also programme recordings from exter-
nal sources via scart socket AV1(TV)or AV2
(DECODER). Select programme number, 'AV1'
with 0.0.1 or 'AV2' with 0.0.2.
or
.
PLAY B-K
STOP C-L
.
. Then press
STOP C-L
, then all TIMER blocks
.
.
0..9
.
0..9
7.
7.
When all inputs are correct, press
. The programming information
STATUS/EXIT
is stored in a TIMER block.
8.
8.
Insert a cassette with an intact security tab
(unprotected).
9.
9.
Switch off with
STANDBY/ON y y
The programmed recording will only function
when the video recorder is switched off with
STANDBY/ON y y
.
Programming a recording with

'TURBO TIMER'

With Turbo Timer, programming a recording that takes
place within the next 24 hours is quick and easy. You
don't even need to switch your TV 'on' as the neces-
sary information will appear in the VCR display. (the
figures below are only shown as examples)
1.
1.
Press
.
TURBO TIMER
'StA' will briefly appear in
the video recorder display.
After 2 seconds, start time
will appear (default setting
is current time). Set the
time you want to start
recording using
PLAY B-K
.
STOP C-L
Error message : 'FUL'
If this error message appears after pressing
, then all TIMER blocks are already
TURBO TIMER
programmed. No more recordings can be pro-
grammed. If you want to clear or check a pro-
grammed recording (TIMER block), select the
programme number on TIMER LIST menu and
then press
CLEAR
.
2.
2.
Press
.
TURBO TIMER
'End' will briefly appear in
the video recorder display.
After 2 seconds, the end
time will appear (default
setting is same as the start
time). Set the time you
want to finish recording
using
PLAY B-K
STOP C-L
3.
3.
Press
.
TURBO TIMER
'Pro' will briefly appear in
the video recorder dis-
play. After 2 seconds,
default program number
will appear in the display.
Set the desired program
number using
PLAY B-K
.
STOP C-L
11
.
PWR.
PWR.
PWR.
PWR.
PWR.
PWR.
.
PWR.
PWR.
PWR.
EN

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vr550/07

Table of Contents