Specifications - Philips LTC 3963/51 Instructions For Use Manual

Time-lapse video recorder
Table of Contents

Advertisement

SPECIFICATIONS

Video Cassette:
Recording:
Tape Speed:
Tape Width:
Operation Temperature:
Video:
Recording Lengths:
Video Input:
Video Output:
S/N Ratio (Video):
S/N Ratio (Audio):
Horizontal Resolution:
Audio Input:
Audio Output:
Audio Frequency Range:
Power:
Power Consumption:
Cabinet Size:
Weight:
* Design and specifications are subject to change without notice.
Maintenance
Two periodic maintenance steps are recommended
to insure the peak performance of this product.
1. Periodically make a careful observation of the
quality of the playback video. If there are excess-
ive dropouts (noise specks) across the video pic-
ture, and the TRACKING control does not clear
the picture, then head cleaning may be necess-
ary. Obtain a high quality head cleaning kit, and
follow the directions carefully. The length of
time between cleaning depends on the amount
of airborne contaminates around the tape
recorder and/or cassette.
2. The unit should be inspected every 3500 hours of
continuous usage by the dealer from whom the
recorder was purchased.
29
VHS type
Rotary two-head helical scan azimuth recording
11.1 mm/sec. (06 mode)
12.7 mm
5°C to 40°C
NTSC color and EIA standard
06, 18, 30, 48, 72, 120, 168, 240 hours and ONE SHOT (00 mode)
1 Vp-p 75 ohm unbalanced
1 Vp-p 75 ohm unbalanced
More than 42 dB (06 mode)
More than 40 dB (06 mode)
Color: 300 lines (06 mode)
Monochrome: 350 lines (06 mode)
–8 dBm 50 Kohm unbalanced
–9 dBm 600 ohm unbalanced
100 Hz to 5 kHz (06 mode)
AC 120V, 60 Hz, grounding type 3 prong AC plug
22W
435 mm (W)
94 mm (H)
17-1/8"(W)
3-11/16"(H)
Approx. 6.2 kg (13.7 lbs)
366 mm (D)
14-7/16"(D)

Advertisement

Table of Contents
loading

Table of Contents