Connecting Wlan Interface - Tally Dascom DL-210 User Manual
Label & barcode printer
Hide thumbs
Also See for DL-210:
- User manual (79 pages) ,
- Maintenance manual (62 pages) ,
- User manual (92 pages)
Table of Contents
Advertisement
Tally Dascom DL-210
Before installation, make you have installed the driver and the driver for Ethernet
interface (see Installing Driver on page 17)
When LAN cables are installed outdoors, make sure devices without proper surge
protection are cushioned by being connected through devices that do have surge
protection.
Otherwise, the devices can be damaged by lightning.
Never attempt to connect the customer display cable, drawer kick-out cable, or the
standard telephone line cable to the 10/100BASE-T LAN connector.
Connect the printer to a network by a LAN cable via a switch.
Connect a 10/100BASE-T cable to the 10/100BASE-T LAN connector by pressing firmly until the
connector clicks into place.
2.7.5 Connecting Wlan Interface
24
User Guide V1.3
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the DL-210 and is the answer not in the manual?