Installing The Auxiliary Handle; Installing The Guard - Toro 51130T Operator's Manual

3
Installing the Auxiliary
Handle
Parts needed for this procedure:
1 Auxiliary handle
Procedure
1. Line up the groove along the handle with the
groove on the auxiliary handle and slide the
auxiliary handle toward the trimmer handle (A of
Figure 3).
2. Snap the handle securely into place (B of
3).
Figure 3
4

Installing the Guard

Parts needed for this procedure:
1 Guard
3 Phillips head screw
Procedure
1. Remove the 3 Phillips screws that are taped to
the guard and slide the guard onto the trimmer
base (A of
2. Secure the guard onto the base of the trimmer
with the 3 Phillips screws (B of
Figure
g195362
9
Figure 4).
Figure
Figure 4
4).
g195743