Table of Contents
Advertisement
CLEANING and MAINTENANCE: FROTHER
1
2
Unscrew the frother
Remove the nozzle
by rotating counter-
from the steam
clockwise and
tube by pulling it
pulling downwards.
downwards.
5
6
A
B
Replace the
nozzle by
To clean the hole in the frother,
inserting it
pull up the selection ring as in
onto the
figure C until the hole appears.
steam tube.
Frother and steam nozzle parts
can be cleaned thoroughly by using De'Longhi Milk Clean.
11
3
4
Thoroughly clean steam
Clean nozzle with warm
nozzle with cloth and
running water and use a
warm water.
needle to clean the hole.
7
8
C
Clean frother with warm
Replace the frother by
running water and use a
first aligning the frother
needle to clean the hole.
notch with the nozzle tab,
After cleaning, push
then insert and rotate
down selection ring as
clockwise into place.
in figure A or B.
Descale the machine when the
orange light
comes on.
1. Turn the machine on.
(A)
2. Completely empty the water tank
and
remove the water filter (if present).
3. Fill the tank with the descaler solution obtained
(B)
(C)
by diluting the descaler
with water
: fill the
water tank up to the MAX level.
(D)
4. Place an empty container
with a minimum
capacity of 50 oz under the hot water spout and
brewing unit.
5. Press the
button and hold for 10 seconds.
The lights will blink in sequence. You are now in
the setting menu.
6. Turn the steam dial to
and press
button. The descaling program automatically
performs a series of deliveries at intervals to
remove the lime scale from inside the coffee
machine.
Important! Danger of Burns
Hot water containing acid flows from
the spout. Avoid contact with splashes
of water.
A
C
B
Important!
• Descaler contains acids which may irritate the skin and eyes. It is vital to respect the manufacturer's safety warnings
given on the descaler pack and the warnings relating to the procedure to follow in the event of contact with the skin
and eyes. Use De'Longhi descaler only. Under no circumstances should you use sulphamic or acetic based descalers.
Their use invalidates the guarantee. Failure to descale the appliance as described also invalidates the guarantee.
DESCALING
7. From time to time turn the steam dial to the
position to deliver small quantities of
descaler from the brewing unit.
8. Once the water tank is empty, the
orange light
starts blinking.
9. To remove the solution and lime scale residues,
rinse the tank and fill it with fresh water (without
descaler); empty the containers and place them
under the boiler outlet and hot water spout.
10. Turn the steam dial to
the position and
press the
button to start the rinsing.
11. From time to time turn the steam dial to the
position to deliver small quantities of
water from the boiler outlet.
12. Once the water tank is empty, turn the steam dial
to
position.
The appliance is now ready for use.
Repairs to the coffee machine relative to lime scale
problems are not covered by the warranty if the
descaling procedure described above is not performed
on a regular basis.
D
EC685
12
Hide quick links:
Advertisement
Table of Contents
