Connect And Set Up A Home Network - Philips HTB4150B/93 User Manual

EasyLink controls
With EasyLink, you can control your SoundStage,
TV, and other connected HDMI-CEC compliant
devices with a single remote control.
[One Touch Play] (One-touch play): When
•
a video disc is in the disc compartment,
press to wake up the TV from standby,
and then play a disc.
[One Touch Standby] (One-touch
•
standby): If one-touch standby is enabled,
your SoundStage can switch to standby
with the remote control of the TV or other
HDMI-CEC devices.
[System Audio Control] (System
•
audio control): If system audio control
is enabled, the audio of the connected
device is output through your SoundStage
automatically when you play the device.
[Audio Input Mapping] (Audio input
•
mapping): If system audio control does not
work, map the connected device to the
correct audio input connector on your
SoundStage (see 'Set up the audio' on
page 11).
Note
•
To change the EasyLink control settings, press
[Setup] > [EasyLink].
Set up the audio
If you cannot hear the audio output of a
connected device through your SoundStage, do
the following:
• Check that you have enabled EasyLink on
all the devices (see 'Enable EasyLink' on
page 10), and
• on your TV, set the audio output to
"Amplifier" (instead of TV speakers). For
details, see the TV user manual, and
• setup the EasyLink audio control.
1
Press .
2
Select [Setup], and then press OK.
3
Select [EasyLink] > [System Audio
Control] > [On].
•
4
Select [EasyLink] > [Audio Input
Mapping].
5
Follow the onscreen instructions to map
the connected device to the audio inputs
on your SoundStage.
•
Connect and set up a home
network
Connect your SoundStage to a network router
for a network setup, and enjoy:
• Streamed multimedia content (see 'Browse
PC through DLNA' on page 19)
• Voole (see 'Voole' on page 18)
• BD Live applications (see 'BD-Live on Blu-
ray' on page 14)
• Software update (see 'Update software
through the Internet' on page 26)
, select
•
Familiarize yourself with the network router, media
server software and networking principles. If necessary,
read documentation that accompanies the network
components. Philips is not responsible for lost, damaged,
or corrupt data.
Before you start
• For internet services and software updates,
make sure that the network router has
access to the Internet with high-speed
connection and is not restricted by
firewalls or other security systems.
• Make the necessary connections described
in quick start guide, and then switch the TV
to the correct source for your SoundStage.
To play the audio from the TV
speakers, select [Off], and skip the
following steps.
If you connect your SoundStage to the
TV through an HDMI ARC connection,
make sure that the TV audio is mapped
to the ARC input on your SoundStage.
Caution
EN
11