Start-Up - Acura RDX Navigation Manual

Start-up

The navigation system starts automatically when you set the power mode to
ACCESSORY or ON. At start-up, the following Confirmation screen is displayed.
20
1. Press to select OK.
u If you do not select OK, the
map screen is displayed after a
certain period of time.
u Your current position is
displayed on the map screen.
2. Press the NAV button if a different
mode is selected.
u Your current position is
displayed on the map screen.
1

Start-up

If the navigation system loses power at any time, you
may need to press and hold the
for more than two seconds, or you may be prompted
for the five-digit security code.
2 System Initialization P. 332
At start-up, the driver's keyless access remote is
automatically detected and the address book
settings, setup preferences, wallpapers, and audio
settings for that driver (e.g., Driver 1) are loaded.
"OK" on the Confirmation screen cannot be selected
by using a voice command.
The first time the NAV or any other mode button is
pressed after you set the power mode to
ACCESSORY or ON, a message guiding you to its
menu screen is displayed.
(Power) button