Laying The Cables - Loewe 800 Operating Instructions Manual

Connection
Connecting the speakers to the subwoofer
Connect the speaker cable to the speaker according to the appropriate installation
instructions. One of the two wires of the speaker cable is marked black in the usual
way. Connect this black marked cable respectively with the black screw terminal
to the subwoofer  (connection diagram see figure right) and the black terminal
on the speaker.
Turn the screw connection of the respective terminal on the subwoofer anticlockwise
about 5 turns for this. Feed the wire end into the screw terminal (top right hand
side) and close the screw terminal in clockwise direction.
Connect the unmarked wires with the red terminals.

Laying the cables

Feed all cables down through the slot in the housing of the subwoofer. Bundle the
cables with the Velcro tape provided.
You can feed the cables tidily out of the subwoofer with the fabric hose available
as an accessory.
Left Subw Right
Phase
180° 0°
AudioLink
-3dB
Left Right
Equaliser
Line In
+6dB
50Hz
Crossover
Frequency
250Hz
min
Bass
Intensity
max
Front Rear
Left Right Center Left Right
Connecting the subwoofer to the mains
Plug the mains plug of the subwoofer into a 230 V AC socket.
Rear
Front
Power Mode
OFF ON Auto Manu.
Speaker
Out
Front
left
Loewe Subwoofer 800
Left Subw Right
Phase
Rear
0°
180°
AudioLink
Front
-3dB
Left Right
Equalizer
Line In
+6dB
50Hz
Crossover
Frequency
250Hz
min
Bass
Intensity
max
Front Rear
Left Right Center Left Right
Speaker
Out
Rear
left
Front
right
Power Mode
OFF ON Auto Manu.
Rear
right
19 -