Advertisement
ASSEMBLY INSTRUCTIONS CONTINUED
PLATFORM BED
4. ATTACH CENTRAL BEAM
a) Place the central beam on the underside of the frame, fitting
it into the cutout in the base of the headboard with arms. In-
sert a M8x45 bolt into the base of the headboard with arms and
into the central beam as below. Tighten with an Allen Key.
5. ATTACH FOOTBOARD
a) Insert metal dowels into the pre-drilled holes in the foot-
board, and insert Univeral Connectors into the pre-drilled
holes in the sidebeams. Feed the metal dowels through the Uni-
versal Connectors, while feeding the dowels in the central beam
through the corresponding holes in the footboard. Tighten the
Universal Connectors with a 6mm Allen Key.
0
5
N
E
R
I
&
H
U
Advertisement
