Led Indication - Toshiba 42RV535U Service Manual

(1) Version information of TV-MICRO
(2) Version information of TV-MICRO EEPROM
(3) Version information of DVD MPU
(4) Revision of image file
(5) Total brightness hour of TV.
(6) Operation hour of TV in LOW mode
(7) Operation hour of TV in HIGH BRIGHT mode
(8) Number of times of TV ON/OFF.
(9) Temperature display of thermo-Sensor. (DMD) : RV535U series not used.
(10) Temperature display of thermo-Sensor. (LAMP) : RV535U series not used.
(11) DMD Engine System status
(12) TV-MICRO System status
(13) IIC-BUS status
Bus line normal is "None" displayed.
When it is abnormal, the block name is displayed as follows.
"SCL-GND" (Red indication) : SCL-GND short circuit
"SDA-GND" (Red indication) : SDA-GND short circuit
"SCL-SDA" (Red indication) : SCL-SDA short circuit
"NG : MTS"
"NG : APRO"
"NG : AVSW"

LED Indication

The green and yellow LED lights on the TV (at the bottom right of the TV) indicate the TV's
status, as described below:
Note: If the TV loses A/C power (e.g., a power outage occurs or the power cord is
unplugged), when power is restored, the yellow LED will blink while the TV is booting until
the remote control is usable. This is normal and is not a sign of malfunction.
: Display 1 byte data.
: Display 1 byte data.
: RV535U series not used.
: LCD Model not used.
: Display 4 bytes data.
: Display 4 bytes data.
: RV535U series not used.
: RV535U series not used.
: RV535U series not used.
: RV535U series not used.