Self-Diagnostic Function - Toshiba 42RV535U Service Manual

Display of adjustment menu. After selecting OPT4 or OPT5, press
OPT4 or OPT5 value as table below.
2. Whenever using new MAIN PC board to the set, set the Model-ID data according to
panel option data.
Model Size
TOP Running change TOP Running change
RV535U 42 CMO
Exit from Service Mode
Pressing POWER button to turn off the TV once.
Self Diagnostic Function
1. Press "Recall" button on Remote Control during display of adjustment menu in the
service mode. This will bring up the "S" in the right corner of screen. Now press "9"
button on remote.
The diagnosis will begin to check if interface among IC's is executed properly.
2. During diagnosis, the following displays are shown.
Panel Maker
-
OPT4
37h -
+ or - to set
OPT3 OPT5 Model-ID
60h 00h 98h