Connecting to External Devices
When watching HDMI from the DVD/Set-top Box
1.
Connect the HDMI cable as shown in the figure below and then connect the power cord (See page 9).
2.
Select an input signal.
Press the INPUT button on the remote control to select the input signal.
Or, press the INPUT button at the top side of the product.
INPUT
ENTER
• Select HDMI
Each time you press the Input button it will change to AV
HDMI.
If nothing is inputted for several seconds the screen will automatically move to the selected menu.
Rear side of the Product
HDMI cable
(not included)
[Set-top Box/DVD]
Component
12
Input
AV
Component
RGB
DVI
HDMI
MENU
RGB
DVI