Kurzweil M130 User Manual page 11

3. Assembling Stand Legs and Piano Body
Piano Body
Pedal
Cable
Piano Body Set Bolts
Pedal Bolts
After putting the Piano Body on each side of the
Stand Leg, align the 4 Bracket holes in the
Stand Leg with the holes in the bottom of the
Piano Body, then fix them by using the Piano
Body Set Bolt.
Thread the Set Bolt into the oval hole in the
connecting Bracket (front Stand Leg).
Connect the Pedal Cable with the Pedal termi-
nal in the Piano Body
After decide the place for the piano, loose the
Pedal Bolt when it goes to the ground to avoid
damaging the Pedal Box with playing the piano.
Caution Unless you loose the Pedal Bolt, it can
be damaged.
How to connect Pedal Cable
Insert the pin until it sounds like "Tick". If the pin
is bent or is not completely connected, the Pedal
will not work.