Table of Contents
Advertisement
IMPORTANT
THIS MENVIER FIRE PANEL IS DESIGNED TO BE USED WITH POLARISED AND
SUPPRESSED BELLS. DO NOT USE WITH UNSUPPRESSED BELLS, UNSUPPRESSED
RELAYS OR NON-POLARISED SOUNDERS OR STROBES ETC. DO NOT CONNECT 230V
MAINS DIRECTLY TO THE PCB. ELECTRICAL INSULATION TESTS SHOULD NOT BE
CARRIED OUT WITH THE CABLES CONNECTED TO THE PANEL OR DETECTORS OR
SOUNDERS.
BEFORE MOUNTING THE PANEL PLEASE CARRY OUT THE FOLLOWING TEST:
CONNECT ALL END OF LINE RESISTORS TO ZONE AND ALARM LINE TERMINALS
(SEE FIG. 3 PG. 27). CONNECT A MAINS SUPPLY, THAT IS NOT SWITCHED ON, TO THE
PANEL. SCREW THE CENTRE SECTION INTO PLACE ON THE BACK BOX. CONNECT THE
BATTERIES AND THEN SWITCH ON THE MAINS SUPPLY.
CHECK THAT ALL LIGHTS EXTINGUISH APART FROM THE POWER ON LIGHT. SELECT
LAMP TEST AND CHECK THAT ALL LAMPS LIGHT AND THE INTERNAL BUZZER
SOUNDS. IF ANY FAULT EXISTS THEN PLEASE CONTACT THE MENVIER SALES OFFICE.
MBG913
MBG914
MBG917
MMT760
MHT790
MFR730
MID710
MDP720
MDB700
MBB244
MBM246
MBM248
MWB824
MDS724
MFS324
MWS424/DB
MWS424/SB
MCD524/DB
MCD524/SD
MXB124/DB
MXB124/SB
MXB224/DB
MXB224/SB
MAS175
MAR724
ACCESSORIES
Flush Mounting Call Point
Surface Mounting Call Point
Weatherproof Call Points
Medium Response Heat Detector
High Temp. Response Heat Detector
Fast Response Heat Detector
Ionisation Smoke Detector
Photoelectric Smoke Detector
Common Detector Base
4ins (100mm) Bell
6ins (150mm) Bell
8ins (200mm) Bell
8ins (200mm) Weatherproof Bell
Ceiling Sounder
Flush Sounder
Weatherproof Sounder - Deep Base
Sounder - Shallow Base
Combined Sounder/Beacon - Deep Base
Combined Sounder/Beacon - Shallow Base
Xenon Beacon - Deep Base (1W)
Xenon Beacon - Shallow Base (1W)
Xenon Beacon - Deep Base (2W)
Xenon Beacon - Shallow Base (2W)
Discrete Sounder/Indicator
Heavy Duty Replay
Hide quick links:
Advertisement
Table of Contents
