Before Installation; Description Of Front Panel Controls - Smeg SU45VCX1 Instructions For Use Manual

Instructions for the User
4

BEFORE INSTALLATION

Never leave packaging residues unattended in the home. Separate waste
packaging materials by type and consign them to the nearest separate
disposal centre.
The inside of the appliance should be cleaned to remove all manufacturing
residues. For further information about cleaning, see point "CARE AND
MAINTENANCE".
5

DESCRIPTION OF FRONT PANEL CONTROLS

All the appliance's control and monitoring devices are placed together on
the front panel. The table below provides the key to the symbols used.
This knob allows you to set
the time, select the cooking
Function's
temperature and duration
parameters
and program the cooking
knob
start and end times. From
now on, for convenience it
will be referred to as PT1.
This knob allows access to
the oven's three operating
Function-
settings, and is also used to
switch on
select a cooking function
knob
(see point "Operating
settings").
This display shows the
Current time /
current time or the cooking
Duration duration.
display
Also visible are the function
cut-out light
Clock
Adjusting the cooking time
EN
13