Honeywell HPA250 Series Important Safety Instructions Manual page 3

Bluetooth smart air purifier true hepa allergen remover
Hide thumbs Also See for HPA250 Series:
Table of Contents

Advertisement

SET-UP
• Select a firm, level and flat location.
• When operating, large volumes of air are drawn toward the air purifier. Surrounding areas should be
cleaned and/or vacuumed frequently to prevent build-up of dust and other contaminants. This may also
help prolong the life of the filter. If the unit is placed on a light colored carpet, a small mat or rug should
be used underneath to prevent permanent staining. This is especially important in homes with contami-
nation from smoking, fireplaces, or where candles are burned.
• Ensure the front of the unit faces away from the closest wall or furniture.
• Ensure no grilles are blocked.
INSTALL TRUE HEPA FILTERS AND ODOR REDUCING PRE-FILTER
A
A
The True HEPA Filters and Odor Reducing Pre-Filter are supplied within the air purifier. New air purifiers
have their filters wrapped to ensure purity, and are labeled to help identify the proper replacement filter.
(
Type
R
True HEPA Filter; Type
R
• Before using your new air purifier you must remove the wrappers covering the filters and
Pre-Filter. Make sure the air purifier is OFF and unplugged. Press the two hand symbols ( ) on the
front grille to release it from the unit and pull the grille toward you to remove it (see Fig. 2). Grasp the
sides of the filter frame near its top end and pull outward. Repeat for the second filter.
• Remove protective wrap from the filters (including the Pre-Filter) that
have been supplied with your air purifier.
• Place the HEPA filters into the air purifier housing. Ensure that the
removal "pull" tabs are facing outward (this will facilitate filter removal
later). Place the Pre-Filter on top of the HEPA filters. Tuck the edges of
the Pre-Filter into the tabs that are located around the edges of where the
HEPA filters are inserted. This will hold the Pre-Filter securely in place.
• Replace the front grille by placing the tabs on the bottom of the grille
into the slot(s) on the unit. Gently push the top of the grille into place by
pressing on the hand symbols ( ) to secure in place.
A
A
Odor Reducing Pre-Filter or
A
R
R
R
A
Household Gas & Odor Reducing Pre-Filter
R
)
Fig. 2
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents