Brand Search - Philips Magnavox PM3 User Manual

Code Entry, cont.
Code Search by Brand
Lets you search for a code for a specific Brand within
the Code Library for a particular manufacturer.
1. Turn on the device (
2. Press and hold the
red indicator remains on, then release
button.
SEARCH
3. Press and quickly release the desired mode button
( , , etc.). The red indicator blinks off once.
TV VCR
4. Press and release the numeric button (0-9)
corresponding to desired Manufacturer (see table on
next page). The red indicator blinks off once. Note,
pressing "0" performs a full library search same as
normal Code Search Method on previous page.
5. Press the
CHANNEL UP
( only)) repeatedly until the device to be
VCR
controlled changes channel. The red indicator blinks
off with each button press. If you accidentally
overshoot the code required, press the
button to backtrack through the library until
DOWN
the device changes channel. Pressing
changes direction to forward again.
6. Press and release
MUTE
Brand Search Method entry is now complete.
Note: When all codes under a Brand have been searched
the red indicator flashes rapidly for 3 seconds.
TV
3.
QU IT
INFO
SELECT
SLEEP
2.
4.
, , etc.) to be controlled.
TV VCR
button until the
CODE SEARCH
CODE
button ((or
POWER
CHANNEL
CHANNEL UP
to install the code.
PO WER
VCR
DVD
CBL
OK
MENU
IN /OU T
CODE SUB PREV.
TITLE CHAN
SEARCH
REPEAT
12
Code Entry, cont.
Brand Search Table
Look up your brand in the appropriate column (TV, VCR,
etc.). Look to see what digit (1, 2, 3, etc.) applies to your
brand, and enter it in step 4 of "Code Search by Brand"
on the previous page.
or
PLAY
5.
6.
13