Sony VGP-BMS77 User Manual page 15

while operating the mouse, the mouse goes
into a standby state for about 1 minute and
cannot be operated during this time. If you
press the CONNECT button, reset the power
switch of the mouse once to ON before
beginning operation.
The mouse may have difficulty
communicating in an environment with 2.4
GHz wireless LAN or other Bluetooth
communication.
→
It is best to use the mouse in a location with
low interference from wireless devices.
Pressing the →
Check whether batteries are inserted in the
CONNECT button
mouse. For details, see "Inserting Batteries into
does not establish the Mouse".
a connection.
→ If the power switch on the mouse is set to OFF,
communication with the personal computer is
not possible. Check the power switch setting
on the bottom of the mouse.
→ If the power does not come on when the power
switch is set to ON, the batteries may be
exhausted. Under normal operating conditions,
a set of alkaline batteries lasts about three
months. Replace the batteries. For details, see
"Inserting Batteries into the Mouse".
→ Communication between the mouse and your
personal computer may not have been properly
established. If the CONNECT button on the
mouse is not pressed within 30 seconds after
the Bluetooth device search begins, mouse
communication is canceled. In such a case,
perform the procedure again to enable
communication. For details, see "Enabling
Communication between the Mouse and Your
Personal Computer.
→ If the mouse and personal computer are too far
apart, communication is not possible. The
maximum communication distance between
the mouse and personal computer is about 32
ft. (10m). If used on a metal table or if
obstacles lie between the mouse and personal
computer, the usable distance may be less.
→
Make sure that the Bluetooth function on your
computer is activated. For details, refer to the
manuals provided with your personal
computer.
The scrolling
The operating system is not compatible.
features do not
→
Use a supported operating system.
work.
The program you are using is not
compatible with the scrolling features.
→
The scrolling features only work with programs
that use a scroll function
→
Some programs do not support the scrolling
features.
The pointer does
→ Processing performed by Windows or other
not move when I
software may temporarily disable the