Table of Contents
Advertisement
VI_Precautions
What to do if the graphic card does not properly support Direct3D acceleration, and
(4)
you can't start MagicView.
You need a graphic card that supports Direct3D acceleration.
▷
What to do if you get an error when pressing the "Shot" button, due to a lack of video
(5)
RAM.
If the graphic card video memory is too weak, you will get an error when capturing a
▷
image. Set the hardware acceleration to minimum, or update the graphics card.
Precautions
Here are some care tips for when using this product:
Use a clean, soft cloth to remove any dust from around the body of your camera.
▷
Do not use a cloth that contains methane alcohol or ammonia to wipe the camera.
▷
Do not let water run into the camera head.
▷
Do not leave fingerprints or other smudges on the camera lens.
▷
Use a soft cloth or cotton swabs to wipe off any dust on the camera lens.
▷
Avoid storing or using the camera in a humid or dusty environment.
▷
Do not expose the camera to direct sunlight or excessive heat.
▷
Do not point the camera lens directly at the sun.
▷
User Guide
MagicView UVC-500 v1.03
39
Advertisement
Table of Contents
