Use Your Headphones - Ignition Auvio User Manual

4
Select a location which provides the best performance.
1.
.
.
.
.
n





w
audio source's speaker output. Doing so could damage the
transmitter and audio source.
33-282 UG.indd 7

Use your headphones

Press 1to turn on the transmitter. The AUVI�� logo
lights blue.
Slide Power On/Off to On to turn on the headphones.
The power LED on the headphones lights blue.
Set the headphones volume to minimum.
Turn on the audio source, and gradually increase the
volume to a comfortable level.
Turn the E-bass (enhanced audio) on or off, and adjust
the Voice Clarity or Isolation H/L/OFF as necessary.
(See Page 4 for more information about features.)
Notes:
Be sure the channel switch on your transmitter and
headphones is set to the same position (1, 2, or 3).
Remove objects between the transmitter and
headphones.
To preserve battery life, be sure to turn off the
headphones when you are not using them.
If you experience any interference, try to select other
operating channels by setting the switches at the
transmitter and the headphones.
The volume of your music is decreased when an
ambient sound is detected if you switch Isolation
H/L/OFF to H or L.
CAUTION: Do not connect the transmitter to your
The AUVI�� logo


9/17/2009 10:04:16 AM