Install Batteries - Ignition Auvio User Manual

2
1.
.
.
.
.
w
ALK/RCH switch set to RCH. Alkaline batteries can get hot
or explode if you try to recharge them.
b




33-282 UG.indd 5

Install Batteries

Remove the battery
compartment cover on the
left ear cup.
Insert four AAA alkaline
or rechargeable batteries
(neither included),
matching the polarity
symbols (+ and –) marked
inside.
Set ALK/RCH to ALK for alkaline or RCH for
rechargeable batteries.
Set Channel to 1, 2 or 3 to match the setting on the
transmitter channel switch.
Replace the cover.
Warning: Never install alkaline batteries with the
Battery Notes:
Replace or charge the batteries if the range decreases,
you do not hear sound from the audio source, or the
power LED on the headphones blinks.
Dispose of old batteries promptly and properly. Do not
burn or bury them.
Use only fresh batteries of the required size and
recommended type. Do not mix old and new batteries
of different sizes or types.
If you do not plan to use the headphones for an
extended time, remove the batteries. Batteries can
leak chemicals that can damage electronic parts.
Channel


ALK/RCH
9/17/2009 10:04:13 AM