Champion CHVS310 User Manual page 8

Table of Contents

Available languages

Cassette playback begins as soon as the tape is inserted.

Adjust the OFF-VOLUME control knob to the desired level.

To advance the tape rapidly, depress the EJ/FF

(Eject/Fast Forward) button approximately half way.

The tape will move forward rapidly as long as the button

is depressed. Normal playback will resume when the

button is released.

When the tape ends the player stops automatically.

Depress the EJ/FF (Eject/Fast Forward) button

completely to remove the cassette from the player.

You may press the EJ/FF (Eject/Fast Forward)

button to stop playing and remove the cassette at

any time.

Phono function operation:

Select the PHONO function, make sure that you have removed the stylus cover from the stylus.

Place your PHONO DISC on the center spindle.

Adjust the OFF/ VOLUME control to the desired level.

NOTE: Do not tum or stop the turntable manually. Moving or jarring the turntable without securing the Tone

Arm clamp could result in damage to the Tone Arm.

Set the turntable speed selector to the appropriate speed, 33, 45, or 78 RPM. If you are playing 45

RPM singles , place the 45 RPM adapter on the center spindle.

When turntable ﬁ nishes playing, tone arm will return to original position automatically.

Bluetooth function operation:

Tum on the unit, rotate the volume control to desert level. Tum the function knob to PH mode, and

make sure the tone-arm is on the resetting state. A short Bluetooth starting tone will be heard, then

the Bluetooth indicator will be ﬂ ashing.

Tum on your Bluetooth device and scan. It will be displayed as "CHVS310" when discovered by

your Bluetooth device.

When the unit is paired with your Bluetooth device, you can hear a short tone from the speakers.

Play your Bluetooth device as you normally do and the sound will be played from this unit.

NOTE: 1. Make sure your Bluetooth device and this unit is within 10 meters of each other.

2. Check and see if there are other Bluetooth devices nearby interfering the signal and connection.

3. This unit is could be paired by multiple different Bluetooth devices, but could only be connected

and played by one of them at a time. Make sure no other device is actively connected to it already

when you are trying to connect the one you are wording on.

Aux in function operation:

Select to the PHONO function. Insert two ends of cord into "AUX IN" socket of unit and

corresponding socket of your external device respectively. Operate external device as usual and

through the speaker of unit you can hear the songs from the external device.

Table of Contents