Champion CHVS310 User Manual page 7

Record CD/MP3/USB/phono/cassette function:
1. In CD/MP3/USB/Phono and CASSETTE playing mode, select to the desired track songs.
2. Insert USB press REC button once, the unit displays <REC>, and the REC indicator lamp will show.
3. Press REC button once more to confi rm record to USB and the REC indicator lamp will dash. The
unit can be recorded songs for your select favorite songs numbers. If want to stop the recording
press STOP button.
NOTE: In PHONO/CASSETTE mode record. to confi rm record mode. The unit display <REC> and red
indicator lamp will dash.
Cancel USB songs operation:
1. The unit plays the song in USB you dislike, pressing and hold the DELETE button on the remote
control for 2 seconds to cancel the song, the unit LCD will display <DEL>.
Repeat playback in CD/MP3/USB:
1. In CD/MP3/USB play mode. Press REPEAT button once, the repeat indicator will dash and the
present track will repeat once it's fi nished.
2. Press the REPEAT button twice, the repeat indicator will stop dashing, remain on, once the disc is
fi nished, it will start over again from the beginning.
3. To cancel repeat playback, press the REPEAT button again, the repeat indicator will go off. Repeat
playback is also canceled by pressing the STOP button.
Random playback in CD/MP3/USB mode:
1. In CD/MP3/USB play mode, press RANDOM button to start random playingfunction, random
indicator will be on. Press this button again to cancel the random function.
Program function in CD/MP3/USB mode:
1. This feature allows you to program 20 tracks in CD model and 99 tracks in MP3/USB mode for
playback in any desired order.
2. In CD/MP3/USB stop mode, press the PROGRAM button to enter the program mode. The program
number briefl y shows '001', and the program indicator will dash. Press the SKIP FWD or SKIP REV
button on the unit front panel or UP/FF or DN/FB button on the remote control to select the fi rst
track number you wish to enter in the program memory, example: track number 008 when
the desired track number appears on the display, press the PROGRAM button again to memorize
the track. The program number briefl y shows '002', then the program indicator will dash.
3. Repeat above steps, select a different track number each time until you have entered up to 20 (CD)
tracks and 99 (MP3/USB) tracks in the program memory.
4. Press the PLAY/PAUSE button to begin the programmed playback. The PROGRAM indicator will
stop dashing. Playback will begin with the fi rst track you have programmed and will continue until
the last programmed track has been played. The programmed sequence may be canceled by
pressing the STOP button twice.
Cassette function operation:
1. Select the CASSETTE function. Insert your
cassette into the slot, as shown in the illustration, cassette into the slot, as shown in the illustration, cassette into the slot, as shown in the illustration,
with the side you wish to play facing up and the with the side you wish to play facing up and the with the side you wish to play facing up and the
open end on the right side.
6.
EN