Using Noise Cancelling Feature; Monitor Feature - Phiaton BT 150 NC Owner's Manual

8. USING NOISE CANCELLING FEATURE

Noise Cancelling 'ON'

9. MONITOR FEATURE

Right Side (while wearing BT 150 NC)
Monitor 'ON':
1 second
1) What is 'Noise Cancelling'?
Noise Cancelling refers to a technology that reduces noise from mid/
low pitched sounds under 1 kHz.
2) Turning Noise Cancelling Feature ON/OFF
- Sliding the NC Button towards ON direction will turn Noise Cancelling
ON and sliding the Button towards OFF will discontinue Noise Cancelling.
(NC function will stop when either L or R earphone is stored.)
3) Noise Cancelling Function Auto ON/OFF
- If the earphone is retracted back in the neckband, while the NC switch is
still 'ON", the Noise Cancelling feature will automatically disable to save
the battery life.
- If you pull the earphones back out from the neckband housing, and the
NC switch is still 'ON,' the Noise Cancelling function will resume.
4) Cautions upon using Noise Cancelling Feature
- Noise Cancelling cannot be used when the battery is completely drained.
- Use while driving or walking will prevent outside noise, such as signals
or alarms, from being heard and may be dangerous to yourself and
others. Heed caution during use.
- Noise Cancelling is optimized for mechanical noises from airplanes,
buses, and subway trains and is not required for use within quiet interior
environments.
- Always switch the NC button to "OFF" when the Noise Cancelling feature
is not needed to save the battery life.
1) The monitor feature allows you to mute your music and noise cancelling
temporarily, so you can hear the surrounding sounds without removing
the ear buds.
2) Press the PLAY/PAUSE Button for about 1 second when you want to
hear the sounds around you. (When the Noise Cancelling feature is
ON and or you are listening to music.)
3) Monitor is continued for 30 seconds unless you press any key to
stop the monitor feature quicker.
(When Using Noise Cancelling Feature)
9