Change A Port Forwarding Rule - NETGEAR Nighthawk X6S User Manual

Nighthawk X6S AC3000 Tri-Band WiFi Router Model R7900P
(Continued)
Field
Internal Starting Port
and Internal Ending
Port
Internal IP address
9. Click the Apply button.
Your settings are saved. The rule is added to the table on the Port Forwarding / Port Triggering page.

Change a Port Forwarding Rule

You can change an existing port forwarding rule.
To change a port forwarding rule:
1. Launch a web browser from a computer or mobile device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Port Forwarding / Port Triggering The Port Forwarding/Port
Triggering window displays.
5. Make sure that the Port Forwarding radio button is selected.
6. In the table, select the radio button for the service or application name.
7. Click the Edit Service button.
The Ports - Custom Services page displays.
8. Change the settings.
For information about the settings, see
on page 165.
9. Click the Apply button.
Your settings are saved. The changed rule displays in the table on the Port Forwarding / Port Triggering
page.
Description
Enter the inbound connection information.
• If the service or application uses a single port, enter the port number in the field.
• If the service or application uses a range or ranges of ports, specify the range in
the field. Specify a range by using a hyphen between the port numbers. Specify
multiple ranges by separating the ranges with commas.
Either enter an IP address in the Internal IP address field or select the radio button
for an attached device that is listed in the table.
Add a Port Forwarding Rule With a Custom Service or Application
Manage Port Forwarding and Port Triggering
166