Pioneer TS4 Service Manual page 40

TS4
7Outline of the IRD Check on the Main Menu
Select IRD CHECK on the MAIN MENU, and press the RETURN key.
The following screen will be displayed.
STEP : * * *
F1 : Set Tuning parameter1
F3 : Set Tuning parameter3
F5 : Set the state of IRD
F7 : Set eeprom data
F9 : Set AV level data
The command selected at "MAKE CHECK_STEP" on the MAIN MENU will be displayed onto ∗ ∗ ∗.
F7 --- Refer to the Precautions after repairs (P.42)
Pressing the RETURN key at this screen will transmit the selected command to the IRD.
If the IRD operates normally for the transmitted command, "OK" will be displayed.
If a problem exists, NG will be displayed.
40
NEXT : * * *
F2 : Set Tuning parameter2
F4 : Set Tuning parameter4
F6 :
F8 :
ESC : Return