Important Safety Notes - Mercedes-Benz S-Class Coupe Operator's Manual

Hide thumbs Also See for S-Class Coupe:
Table of Contents

Advertisement

door opener, contact an authorized Mercedes-
Benz Center.
Alternatively, you can call the following tele-
phone assistance services:
USA: Mercedes-Benz Customer Assistance
R
Center at 1-800-FOR-MERCedes
Canada: Customer Service at
R
1-800-387-0100
®
HomeLink
hotline 1-800-355-3515 (free of
R
charge)
More information on HomeLink
patible products is also available online at
http://www.homelink.com.
Notes on the declaration of conformity
(
page 26).
Y
USA: FCC ID: CB2HMIHL4
Canada: IC: 279B-HMIHL4

Important safety notes

G
WARNING
When you operate or program the garage door
with the integrated garage door opener, per-
sons in the range of movement of the garage
door can become trapped or struck by the
garage door. There is a risk of injury.
When using the integrated garage door
opener, always make sure that nobody is
within the range of movement of the garage
door.
G
WARNING
Combustion engines emit poisonous exhaust
gases such as carbon monoxide. Inhaling
these exhaust gases leads to poisoning. There
is a risk of fatal injury. Therefore never leave
the engine running in enclosed spaces with-
out sufficient ventilation.
Programming
Programming buttons
Pay attention to the "Important safety notes"
(
page 285).
Y
®
and/or com-
Garage door remote control A is not included
with the integrated garage door opener.
Turn the SmartKey to position 2 in the ignition
X
lock (
Select one of buttons ; to ? to use to con-
X
trol the garage door drive.
To start programming mode: press and
X
hold one of buttons ; to ? on the integrated
garage door opener.
The garage door opener is now in program-
ming mode. After a short time, indicator
lamp : lights up yellow.
Indicator lamp : lights up yellow as soon as
button ;, = or ? is stored for the first time.
If the selected button has already been pro-
gramed, indicator lamp : will only light up
yellow after ten seconds have elapsed.
Release button ;, = or ?. Indicator
X
lamp : flashes yellow.
To program the remote control: point
X
garage door remote control A towards but-
tons ; to ? on the rear-view mirror at a dis-
tance of 2 to 8 in (5 to 20 cm).
Press and hold button B on remote control
X
A until indicator lamp : lights up green.
When indicator lamp : lights up green: pro-
gramming is finished.
When indicator lamp : flashes green: pro-
gramming was successful. The next step is to
synchronize the rolling code (
Release button B on remote control A for
X
the garage door drive system.
If indicator lamp : lights up red: repeat the
programing procedure for the corresponding
button on the rear-view mirror. When doing
so, vary the distance between remote control
A and the rear-view mirror.
The required distance between remote con-
trol A and the integrated garage door opener
depends on the garage door drive system.
page 136).
Y
Features
285
page 286).
Y
Z

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

S-class cabriolet

Table of Contents