Philips CCB 134AT Owner's Manual page 50

50 SmartLock (cont'd)
To change the access code, follow these steps.
1
Press the COMBI button, then press the MENU button.
SMARTLOCK
> PRESS B
REVIEW
EXIT
PRIM. SETUP
VCR PROGRAM
VCR SETUP
2
Press the PLAY/ button or the STOP/
SMARTLOCK. Then, press the F.FWD/B button.
SMARTLOCK
_ _ _ _
Enter Your Access Code
3
Use the Number buttons to enter your old access code.
The default code is 0711. If you have never set up your personal
access code, use 0711 now.
After you enter the code, the SMARTLOCK menu will appear.
SMARTLOCK
X X X -
Enter Your Access Code
4
Press the PLAY/ button or the STOP/
CHANGE CODE. Then, press the F.FWD/B button.
SMARTLOCK
BLOCK
> CHANGE CODE
SELECT KL CHOOSE B
TO END PRESS EXIT
5
Use the Number buttons to enter your desired access
code in the New Code space. Then, enter the same code
in the Confirm Code space.
Your new access code should be recorded. You will return to the
SMARTLOCK menu.
_ _ _ _
New Code
_ _ _ _
Confirm Code
6
Press the STATUS/EXIT button.
1
button to select
• In order to protect the privacy of
button to select
• If a "Wrong Code..." message
• You cannot use the default code
• If a power failure occurs, the
• If you connect the power cord to an
2,4
POWER EJECT
SLEEP/WAKE UP SPEED MEMORY
REC/OTR PAUSE/STILL
PLAY
REW F.FWD
STOP
STATUS/EXIT
1 2 3
CH.
4 5 6
7 8 9
0
SURF
FM
VOL.
CABLE/DBS COMBI
VCR PLUS+
/ENTER
VAR.SLOW MUTE
TRACKING
F.ADV SLOW
SMART
SKIP INDEX
PICTURE SOUND SEARCH SEARCH
3,5
Helpful Hints
the access code, an X will appear
on the screen instead of the num-
ber you enter.
appears on the screen after you
complete step 5, you entered the
wrong numbers in the Confirm Code
space. Repeat the steps on this
page.
after you set up your personal
access code.
default code, 0711, will be the
active access code again.
AC outlet that is controlled by a wall
switch, your personal access code
will be erased every time you turn
off the power at the wall switch.
The default code will be the active
code again.
6